Hi Andrew,
On Fri, May 2, 2014 at 11:21 PM, Andrew Bresticker <abres...@google.com> wrote:
> Hi Arun,
>
> On Fri, May 2, 2014 at 6:03 AM, Arun Kumar K <arun...@samsung.com> wrote:
>> From: Alim Akhtar <alim.akh...@samsung.com>
>>
>> Exynos5800 clock structure is mostly similar to 5420 with only
>> a small delta changes. So the 5420 clock file is re-used for
>> 5800 also. The common clocks for both are seggreagated and few
>> clocks which are different for both are separately initialized.
>
> As Tomasz mentioned, this will certainly conflict with Shaik and
> Rahul's 5420 clock cleanup series. That series adds/fixes the MAU,
> WCORE, and ISP blocks which also have differences from 5420 to 5800.
>
Yes I will rebase on that series. I dropped many of the changes
in 5800 as it doesnt have the common terminating GATES as of now.
If rebased on Shaik/Rahul cleanup series, I can put all of them
back again.
>>
>> Signed-off-by: Alim Akhtar <alim.akh...@samsung.com>
>> Signed-off-by: Arun Kumar K <arun...@samsung.com>
>> ---
>> .../devicetree/bindings/clock/exynos5420-clock.txt | 3 +-
>> drivers/clk/samsung/clk-exynos5420.c | 192
>> +++++++++++++++-----
>> include/dt-bindings/clock/exynos5420.h | 1 +
>> 3 files changed, 150 insertions(+), 46 deletions(-)
>>
[snip]
>> +struct samsung_mux_clock exynos5800_mux_clks[] __initdata = {
>> + MUX(0, "mout_aclk400_mscl", mout_group3_5800_p, SRC_TOP0, 4, 3),
>> +
>> + MUX(0, "mout_aclk333_432_gscl", mout_group6_5800_p, SRC_TOP1, 0, 2),
>> + MUX(0, "mout_aclk266", mout_group5_5800_p, SRC_TOP1, 20, 2),
>> + MUX(0, "mout_aclk333", mout_group1_5800_p, SRC_TOP1, 28, 2),
>> +
>> + MUX(0, "mout_aclk333_g2d", mout_group5_5800_p, SRC_TOP2, 8, 2),
>> + MUX(0, "mout_aclk266_g2d", mout_group5_5800_p, SRC_TOP2, 12, 2),
>> + MUX(0, "mout_aclk300_jpeg", mout_group5_5800_p, SRC_TOP2, 20, 2),
>> + MUX(0, "mout_aclk300_disp1", mout_group5_5800_p, SRC_TOP2, 24, 2),
>> + MUX(0, "mout_aclk300_gscl", mout_group5_5800_p, SRC_TOP2, 28, 2),
>> +
>> + MUX(0, "sclk_bpll", bpll_p, SRC_TOP7, 24, 1),
>> + MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1),
>> +
>> + MUX(0, "mout_user_aclk432_scaler", mout_group9_5800_p,
>> + SRC_TOP9, 28, 1),
>>
>> + MUX(0, "mout_sw_aclk432_scaler", mout_group8_5800_p,
>> + SRC_TOP13, 28, 1),
>
> The aclk432_scaler tree is incomplete - you're missing
> mout_aclk432_scaler and dout_aclk432_scaler. The rest of the CAM
> block (aclk432_cam, aclkfl1_550_cam, and aclk550_cam) is also missing,
> though I suppose that could go in a later patch.
>
The CAM gates you mentioned are omitted as I found that there
are some issues caused by it during S2R sequences and I have
to leave it as CLK_IGNORE_UNUSED for proper functionality.
[snip]
Regards
Arun
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
