Hi Jaehoon, Please check one thing below.
On Mon, June 30, 2014, Jaehoon Chung wrote: > dw-mmc controller can support multiple slots. > But, there are no use-cases anywhere. So we don't need to support the > slot-node for dw-mmc controller. > And "supports-highspeed" property in dw-mmc is deprecated. > "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed". > > Signed-off-by: Jaehoon Chung <[email protected]> > Reviewed-by: Tushar Behera <[email protected]> > Reviewed-by: Ulf Hansson <[email protected]> > --- > diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts > b/arch/arm/boot/dts/exynos5420-arndale- > octa.dts > index 434fd9d..5f37b81 100644 > --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts > +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts > @@ -50,7 +50,6 @@ > mmc@12200000 { > status = "okay"; > broken-cd; > - supports-highspeed; > card-detect-delay = <200>; > samsung,dw-mshc-ciu-div = <3>; > samsung,dw-mshc-sdr-timing = <0 4>; > @@ -58,16 +57,12 @@ > pinctrl-names = "default"; > pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; > vmmc-supply = <&ldo10_reg>; > - > - slot@0 { > - reg = <0>; > - bus-width = <8>; > - }; > + bus-width = <8>; > + cap-mmc-highspeed; > }; > > mmc@12220000 { > status = "okay"; > - supports-highspeed; > card-detect-delay = <200>; > samsung,dw-mshc-ciu-div = <3>; > samsung,dw-mshc-sdr-timing = <2 3>; > @@ -75,11 +70,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; > vmmc-supply = <&ldo10_reg>; > - > - slot@0 { > - reg = <0>; > - bus-width = <4>; > - }; > + bus-width = <8>; <4> is correct? > + cap-mmc-highspeed; Thanks, Seungwon Jeon -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
