Hi, Seungwon.

I will fix it, and add  dt-file related with exynos3250. 

Best Regards,
Jaehoon Chung

On 07/07/2014 04:29 PM, Seungwon Jeon wrote:
> Hi Jaehoon,
> 
> Please check one thing below.
> 
> On Mon, June 30, 2014, Jaehoon Chung wrote:
>> dw-mmc controller can support multiple slots.
>> But, there are no use-cases anywhere. So we don't need to support the
>> slot-node for dw-mmc controller.
>> And "supports-highspeed" property in dw-mmc is deprecated.
>> "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
>>
>> Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com>
>> Reviewed-by: Tushar Behera <trbli...@gmail.com>
>> Reviewed-by: Ulf Hansson <ulf.hans...@linaro.org>
>> ---
> 
>> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts 
>> b/arch/arm/boot/dts/exynos5420-arndale-
>> octa.dts
>> index 434fd9d..5f37b81 100644
>> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
>> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
>> @@ -50,7 +50,6 @@
>>      mmc@12200000 {
>>              status = "okay";
>>              broken-cd;
>> -            supports-highspeed;
>>              card-detect-delay = <200>;
>>              samsung,dw-mshc-ciu-div = <3>;
>>              samsung,dw-mshc-sdr-timing = <0 4>;
>> @@ -58,16 +57,12 @@
>>              pinctrl-names = "default";
>>              pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
>>              vmmc-supply = <&ldo10_reg>;
>> -
>> -            slot@0 {
>> -                    reg = <0>;
>> -                    bus-width = <8>;
>> -            };
>> +            bus-width = <8>;
>> +            cap-mmc-highspeed;
>>      };
>>
>>      mmc@12220000 {
>>              status = "okay";
>> -            supports-highspeed;
>>              card-detect-delay = <200>;
>>              samsung,dw-mshc-ciu-div = <3>;
>>              samsung,dw-mshc-sdr-timing = <2 3>;
>> @@ -75,11 +70,8 @@
>>              pinctrl-names = "default";
>>              pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>>              vmmc-supply = <&ldo10_reg>;
>> -
>> -            slot@0 {
>> -                    reg = <0>;
>> -                    bus-width = <4>;
>> -            };
>> +            bus-width = <8>;
> <4> is correct?
> 
>> +            cap-mmc-highspeed;
> 
> Thanks,
> Seungwon Jeon
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to