Hi!
I've got a system with an Adaptec aic7899 controller and on
- channel A (SCSI): iomega JAZ 2 GB, CDR Plextor
- channel B (SCSI160): 2 IBM Harddisks (device 0 and 1)
Installing SUSE Linux 7.2 was no problem, the 2 HDs were mounted to "sdb" and
"sdc" ("sda" was reserved for the iomega JAZ drive). The current BIOS- and
SCSI-configuration is set to boot from SCSI, channel B, device 0.
Problem:
While booting LILO stops with:
LI
This is because the kernel _only_ tries to boot from SCSI channel A and finds
the iomega JAZ as SCSI-drive (sda). But the system is installed on sdb. As
far as I know, swapping the two channels is not possible.
Anyone out there who knows how to solve the problem?
Thanks,
Michael
--
Dipl.-Ing. Michael Kettner, Wissenschaftlicher Mitarbeiter
Institut f�r Verkehrswesen, Eisenbahnbau und -betrieb, Universitaet Hannover
Appelstr. 9A # Tel: ++49/(0)511/762-4273
D-30167 Hannover # Fax: ++49/(0)511/762-3001
http://www.ive.uni-hannover.de # [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
