On Wed, Oct 12, 2016 at 01:14:18PM -0700, James Smart wrote:
>
> Synchronize link speed with boot driver
>
> Link speed settings set by the boot driver are reported by the hw.
> Driver will attempt to read them, and if set, will respect their
> values.
> The driver can override the settings with its own if instructed by
> user space (via bsg), with the new values being picked up by the
> boot driver.
>
> Signed-off-by: Dick Kennedy <dick.kenn...@broadcom.com>
> Signed-off-by: James Smart <james.sm...@broadcom.com>
> ---
> drivers/scsi/lpfc/lpfc.h | 4 ++++
> drivers/scsi/lpfc/lpfc_attr.c | 7 +++++-
> drivers/scsi/lpfc/lpfc_bsg.c | 44 +++++++++++++++++++++++++++++++++++
> drivers/scsi/lpfc/lpfc_bsg.h | 10 ++++++++
> drivers/scsi/lpfc/lpfc_hw4.h | 3 +++
> drivers/scsi/lpfc/lpfc_init.c | 54
> +++++++++++++++++++++++++++++++++++++++++++
> 6 files changed, 121 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
> index debba5e..8a20b4e 100644
> --- a/drivers/scsi/lpfc/lpfc.h
> +++ b/drivers/scsi/lpfc/lpfc.h
> @@ -648,6 +648,10 @@ struct lpfc_hba {
> #define HBA_FCP_IOQ_FLUSH 0x8000 /* FCP I/O queues being flushed */
> #define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW
> dump */
> #define HBA_RECOVERABLE_UE 0x20000 /* Firmware supports recoverable UE */
> +#define HBA_FORCED_LINK_SPEED 0x40000 /*
> + * Firmware supports Forced Link Speed
> + * capability
> + */
> uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
> struct lpfc_dmabuf slim2p;
>
> diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
> index 3740e5d..39ba01a 100644
> --- a/drivers/scsi/lpfc/lpfc_attr.c
> +++ b/drivers/scsi/lpfc/lpfc_attr.c
> @@ -3668,7 +3668,12 @@ lpfc_link_speed_store(struct device *dev, struct
> device_attribute *attr,
> int nolip = 0;
> const char *val_buf = buf;
> int err;
> - uint32_t prev_val;
> + uint32_t prev_val, if_type;
> +
> + if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
> + if ((if_type == LPFC_SLI_INTF_IF_TYPE_2) &&
> + (phba->hba_flag & HBA_FORCED_LINK_SPEED))
The parentheses aren't needed here.
> + return -EPERM;
>
> if (!strncmp(buf, "nolip ", strlen("nolip "))) {
> nolip = 1;
> diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
> index 05dcc2a..f9f5972 100644
> --- a/drivers/scsi/lpfc/lpfc_bsg.c
> +++ b/drivers/scsi/lpfc/lpfc_bsg.c
> @@ -5185,6 +5185,47 @@ no_dd_data:
> return rc;
> }
>
> +static int
> +lpfc_forced_link_speed(struct fc_bsg_job *job)
This has an unfortunate collision with my bsg rewrite series. Please remind me
of that fact when your patches are merged and mine aren't yet. But it's a
nice test case :-).
> +{
> + struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
Please use shost_priv() here, or if you want to make my live easy
struct Scsi_Host *shost = job->shost;
struct lpfc_vport *vport = shost_priv(shost);
Other than that,
Reviewed-by: Johannes Thumshirn <jthumsh...@suse.de>
--
Johannes Thumshirn Storage
jthumsh...@suse.de +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
