During the IOP reset stress testing, it was found that the drives can be
marked offline when the adapter controller crashes and IO's are running
in parallel. When the controller does come back from the reset, the drive
that is marked offline is not exposed.
Fixed by removing and adding drives that are marked offline. In addition
invoke a scsi host bus rescan to capture any additional configuration
changes.
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renuku...@microsemi.com>
Reviewed-by: David Carroll <david.carr...@microsemi.com>
---
drivers/scsi/aacraid/commsup.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index de4285d..78588e4 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1628,11 +1628,29 @@ static int _aac_reset_adapter(struct aac_dev *aac, int
forced, u8 reset_type)
command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
command->scsi_done(command);
}
+ /*
+ * Any Device that was already marked offline needs to be cleaned up
+ */
+ __shost_for_each_device(dev, host) {
+ if (!scsi_device_online(dev)) {
+ sdev_printk(KERN_INFO, dev, "Removing offline
device\n");
+ scsi_remove_device(dev);
+ scsi_device_put(dev);
+ }
+ }
retval = 0;
out:
aac->in_reset = 0;
scsi_unblock_requests(host);
+ /*
+ * Issue bus rescan to catch any configuration that might have
+ * occurred
+ */
+ if (!retval) {
+ dev_info(&aac->pdev->dev, "Issuing bus rescan\n");
+ scsi_scan_host(host);
+ }
if (jafo) {
spin_lock_irq(host->host_lock);
}
--
2.7.4
