With the introduction of commit e39a97353e53 ("scsi: core: return
BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()"), a command that
failed with hostbyte=DID_OK and driverbyte=DRIVER_SENSE but lacking
additional sense information will have a return code set to BLK_STS_OK.
This results in the request issuer to see successful request execution
despite the failure. An example of such case is an unaligned write on a
host managed ZAC disk connected to a SAS HBA with a malfunctioning SAT.
The unaligned write command gets aborted but has no additional sense
information.sd 10:0:0:0: [sde] tag#3905 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 10:0:0:0: [sde] tag#3905 Sense Key : Aborted Command [current] sd 10:0:0:0: [sde] tag#3905 Add. Sense: No additional sense information sd 10:0:0:0: [sde] tag#3905 CDB: Write(16) 8a 00 00 00 00 00 02 0c 00 01 00 00 00 01 00 00 print_req_error: I/O error, dev sde, sector 274726920 In scsi_io_completion(), sense key handling to not change the request error code and success being reported to the issuer. Fix this by making sure that the error code always indicates an error if scsi_io_completion() decide that the action to be taken for a failed command is to not retry it and terminate it immediately (ACTION_FAIL) . Signed-off-by: Damien Le Moal <[email protected]> Fixes: e39a97353e53 ("scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()") Cc: Hannes Reinecke <[email protected]> Cc: <[email protected]> --- drivers/scsi/scsi_lib.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index c84f931388f2..87579bfcc186 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1002,6 +1002,15 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) scsi_print_command(cmd); } } + /* + * The command failed and should not be retried. If the host + * byte is DID_OK, then __scsi_error_from_host_byte() returned + * BLK_STS_OK and error indicates a success. Make sure to not + * use that as the completion code and always return an + * I/O error. + */ + if (error == BLK_STS_OK) + error = BLK_STS_IOERR; if (!scsi_end_request(req, error, blk_rq_err_bytes(req), 0)) return; /*FALLTHRU*/ -- 2.14.3
