Be sure that in your system's CMOS setup, you allocate the interrupt your using
to Legasy/ISA as opposed to PCI in your PCI config section. This could be the
problem....
Russell
On 04-Jun-99 ejcpons wrote:
> hello
>
> i have an adaptec 1505 scsi card driving my scanner
>
> i use in lilo.conf the command (append="aha152x=.........") with good
> parameters but!
>
> when my computer is booting, i can read this messages:
>
> aha152x:processing command line:ok
> aha152x:bios test:passed,detected 1 controller(s)
> aha152x0 vital data.......(parameters)
> aha152x:trying software interrupt, lost
> aha152x: irq XX possibly wrong please verif
> scsi 0 hosts
> scsi detected total
>
> and of course i can't use my scsi card.
> i presise that i have used all the irq and io possible parameters
>
>
> sorry for my approximative english!!!
>
> thank you
>
> JC Pons
> [EMAIL PROTECTED]
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
Words to Live by...
Work like you don't need money,
Love like you've never been hurt,
Dance like nobody's watching.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
