On Sat, Aug 07, 1999 at 10:13:02PM -0600, Phil Curtiss wrote:
> SCSI device sda: hdwr sector= 512 bytes. Sectors= 2050860 [1001 MB] [1.0 GB]
> sda: unknown partition table
> ncr53c810-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
> SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2050860 [1001 MB] [1.0 GB]
> sdb: unknown partition table
> ncr53c810-0-<2,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
> SCSI device sdc: hdwr sector= 512 bytes. Sectors= 2050860 [1001 MB] [1.0 GB]
> sdc: unknown partition table
>
> With the above configuration, I am able to mount the first partition of any of
> the disk units by,
>
> ...
>
> These drivers were in a Dec Alpha running OSF/1 v.3.2c. The drive which is
> associated with /dev/sda in linux had two partitions, rz0a and rz0g in OSF/1.
> The drive associated with /dev/sdb in linux had two paritions, rz1f and rz1g
> in OSF/1. The drive associated with /dev/sdc in linux had two paritions, rz2f
> and rz2g in OSF/1.
>
> I need help getting data off these partitions. The alpha server from which
> these drives (RZ26L) came is no more, and I don't have access to such a
> machine.
Did you enable CONFIG_BSD_DISKLABEL, CONFIG_SMD_DISKLABEL,
CONFIG_SOLARIS_X86_PARTITION, CONFIG_UNIXWARE_DISKLABEL during your kernel
config. If not: Do so!
--
Kurt Garloff <[EMAIL PROTECTED]> Wuppertal, FRG
PGP2 key: See mail header, key servers Linux kernel development
SuSE GmbH, N�rnberg, FRG SCSI drivers: tmscsim(DC390), DC395
PGP signature
