Ok, Here's the situation:
I have a system with a Pioneer DR-506S CDROM and a Plextor PlexWriter CD-R
both SCSI on the same SCSI chain. Both will work in windows, however in
Linux, only the PlexWriter will mount properly. If I remove the
PlexWriter from the chain, the DR-506S will work properly without any
problems. Both also have different SCSI IDs. Anyone know what might be
causing this? Its been driving me nuts, and all my searches through the
mailing lists have yielded me nothing. For the sake pf providing as much
info about my system as possible, here's messages from boot time on...
[root@kevlar /root]# uname -a
Linux kevlar 2.2.5-15 #5 SMP Sun Jun 13 16:39:57 EDT 1999 i686 unknown
<Start messages File>
Aug 30 19:32:09 kevlar syslog: syslogd startup succeeded
Aug 30 19:32:09 kevlar kernel: klogd 1.3-3, log source = /proc/kmsg started.
Aug 30 19:32:09 kevlar kernel: Inspecting /boot/System.map-2.2.5-15
Aug 30 19:32:09 kevlar syslog: klogd startup succeeded
Aug 30 19:32:09 kevlar kernel: Loaded 6716 symbols from /boot/System.map-2.2.5-15.
Aug 30 19:32:09 kevlar kernel: Symbols match kernel version 2.2.5.
Aug 30 19:32:09 kevlar kernel: Loaded 3 symbols from 2 modules.
Aug 30 19:32:09 kevlar kernel: Linux version 2.2.5-15 ([EMAIL PROTECTED])
(gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #5 SMP Sun Jun 13
16:39:57 EDT 1999
Aug 30 19:32:09 kevlar kernel: Intel MultiProcessor Specification v1.4
Aug 30 19:32:09 kevlar kernel: Virtual Wire compatibility mode.
Aug 30 19:32:09 kevlar kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at:
0xFEE00000
Aug 30 19:32:09 kevlar kernel: Processor #1 Pentium(tm) Pro APIC version 17
Aug 30 19:32:09 kevlar kernel: Processor #0 Pentium(tm) Pro APIC version 17
Aug 30 19:32:09 kevlar kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Aug 30 19:32:09 kevlar kernel: Processors: 2
Aug 30 19:32:09 kevlar kernel: mapped APIC to ffffe000 (fee00000)
Aug 30 19:32:09 kevlar kernel: mapped IOAPIC to ffffd000 (fec00000)
Aug 30 19:32:09 kevlar kernel: Detected 300687181 Hz processor.
Aug 30 19:32:09 kevlar kernel: Console: colour VGA+ 80x25
Aug 30 19:32:09 kevlar kernel: Calibrating delay loop... 299.83 BogoMIPS
Aug 30 19:32:09 kevlar kernel: Memory: 127560k/131072k available (1428k kernel code,
416k reserved, 1600k data, 68k init)
Aug 30 19:32:09 kevlar kernel: Checking 386/387 coupling... OK, FPU using exception 16
error reporting.
Aug 30 19:32:09 kevlar kernel: Checking 'hlt' instruction... OK.
Aug 30 19:32:09 kevlar kernel: POSIX conformance testing by UNIFIX
Aug 30 19:32:09 kevlar kernel: per-CPU timeslice cutoff: 100.22 usecs.
Aug 30 19:32:09 kevlar kernel: CPU1: Intel Pentium II (Klamath) stepping 04
Aug 30 19:32:09 kevlar kernel: calibrating APIC timer ...
Aug 30 19:32:09 kevlar kernel: ..... CPU clock speed is 300.6919 MHz.
Aug 30 19:32:09 kevlar kernel: ..... system bus clock speed is 66.8203 MHz.
Aug 30 19:32:09 kevlar kernel: Booting processor 0 eip 2000
Aug 30 19:32:09 kevlar kernel: Calibrating delay loop... 299.83 BogoMIPS
Aug 30 19:32:09 kevlar kernel: OK.
Aug 30 19:32:09 kevlar kernel: CPU0: Intel Pentium II (Klamath) stepping 04
Aug 30 19:32:09 kevlar kernel: Total of 2 processors activated (599.65 BogoMIPS).
Aug 30 19:32:09 kevlar kernel: enabling symmetric IO mode... ...done.
Aug 30 19:32:09 kevlar kernel: ENABLING IO-APIC IRQs
Aug 30 19:32:09 kevlar kernel: init IO_APIC IRQs
Aug 30 19:32:09 kevlar kernel: IO-APIC pin 0, 9, 10, 11, 13, 20, 21, 22, 23 not
connected.
Aug 30 19:32:09 kevlar kernel: number of MP IRQ sources: 18.
Aug 30 19:32:09 kevlar kernel: number of IO-APIC registers: 24.
Aug 30 19:32:09 kevlar kernel: testing the IO APIC.......................
Aug 30 19:32:09 kevlar kernel: .... register #00: 02000000
Aug 30 19:32:09 kevlar kernel: ....... : physical APIC id: 02
Aug 30 19:32:09 kevlar kernel: .... register #01: 00170011
Aug 30 19:32:09 kevlar kernel: ....... : max redirection entries: 0017
Aug 30 19:32:09 kevlar kernel: ....... : IO APIC version: 0011
Aug 30 19:32:09 kevlar kernel: .... register #02: 00000000
Aug 30 19:32:09 kevlar kernel: ....... : arbitration: 00
Aug 30 19:32:09 kevlar kernel: .... IRQ redirection table:
Aug 30 19:32:09 kevlar kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Aug 30 19:32:09 kevlar kernel: 00 000 00 1 0 0 0 0 0 0 00
Aug 30 19:32:09 kevlar kernel: 01 000 00 0 0 0 0 0 1 1 59
Aug 30 19:32:09 kevlar kernel: 02 0FF 0F 0 0 0 0 0 1 1 51
Aug 30 19:32:09 kevlar kernel: 03 000 00 0 0 0 0 0 1 1 61
Aug 30 19:32:09 kevlar kernel: 04 000 00 0 0 0 0 0 1 1 69
Aug 30 19:32:09 kevlar kernel: 05 000 00 0 0 0 0 0 1 1 71
Aug 30 19:32:09 kevlar kernel: 06 000 00 0 0 0 0 0 1 1 79
Aug 30 19:32:09 kevlar kernel: 07 000 00 0 0 0 0 0 1 1 81
Aug 30 19:32:09 kevlar kernel: 08 000 00 0 0 0 0 0 1 1 89
Aug 30 19:32:09 kevlar kernel: 09 000 00 1 0 0 0 0 0 0 00
Aug 30 19:32:09 kevlar kernel: 0a 000 00 1 0 0 0 0 0 0 00
Aug 30 19:32:09 kevlar kernel: 0b 000 00 1 0 0 0 0 0 0 00
Aug 30 19:32:09 kevlar kernel: 0c 000 00 0 0 0 0 0 1 1 91
Aug 30 19:32:09 kevlar kernel: 0d 000 00 1 0 0 0 0 0 0 00
Aug 30 19:32:09 kevlar kernel: 0e 000 00 0 0 0 0 0 1 1 99
Aug 30 19:32:09 kevlar kernel: 0f 000 00 0 0 0 0 0 1 1 A1
Aug 30 19:32:09 kevlar kernel: 10 0FF 0F 1 1 0 1 0 1 1 A9
Aug 30 19:32:09 kevlar kernel: 11 0FF 0F 1 1 0 1 0 1 1 B1
Aug 30 19:32:09 kevlar kernel: 12 0FF 0F 1 1 0 1 0 1 1 B9
Aug 30 19:32:09 kevlar kernel: 13 0FF 0F 1 1 0 1 0 1 1 C1
Aug 30 19:32:09 kevlar kernel: 14 000 00 1 0 0 0 0 0 0 00
Aug 30 19:32:09 kevlar kernel: 15 000 00 1 0 0 0 0 0 0 00
Aug 30 19:32:09 kevlar kernel: 16 000 00 1 0 0 0 0 0 0 00
Aug 30 19:32:09 kevlar kernel: 17 000 00 1 0 0 0 0 0 0 00
Aug 30 19:32:09 kevlar kernel: .................................... done.
Aug 30 19:32:09 kevlar kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0750
Aug 30 19:32:09 kevlar kernel: PCI: Using configuration type 1
Aug 30 19:32:09 kevlar kernel: PCI: Probing PCI hardware
Aug 30 19:32:09 kevlar kernel: PCI->APIC IRQ transform: (B0,I4,P3) -> 19
Aug 30 19:32:09 kevlar kernel: PCI->APIC IRQ transform: (B0,I9,P0) -> 19
Aug 30 19:32:09 kevlar kernel: PCI->APIC IRQ transform: (B0,I10,P0) -> 18
Aug 30 19:32:09 kevlar kernel: PCI->APIC IRQ transform: (B0,I11,P0) -> 17
Aug 30 19:32:09 kevlar kernel: PCI->APIC IRQ transform: (B0,I12,P0) -> 16
Aug 30 19:32:09 kevlar kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Aug 30 19:32:09 kevlar kernel: Linux NET4.0 for Linux 2.2
Aug 30 19:32:09 kevlar kernel: Based upon Swansea University Computer Society NET3.039
Aug 30 19:32:09 kevlar kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0.
Aug 30 19:32:09 kevlar kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Aug 30 19:32:09 kevlar kernel: IP Protocols: ICMP, UDP, TCP
Aug 30 19:32:09 kevlar kernel: NET4: Linux IPX 0.38 for NET4.0
Aug 30 19:32:09 kevlar kernel: IPX Portions Copyright (c) 1995 Caldera, Inc.
Aug 30 19:32:09 kevlar kernel: NET4: AppleTalk 0.18 for Linux NET4.0
Aug 30 19:32:09 kevlar kernel: Starting kswapd v 1.5
Aug 30 19:32:09 kevlar kernel: Detected PS/2 Mouse Port.
Aug 30 19:32:09 kevlar kernel: Serial driver version 4.27 with no serial options
enabled
Aug 30 19:32:09 kevlar kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Aug 30 19:32:09 kevlar kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Aug 30 19:32:09 kevlar kernel: ttyS03 at 0x02e8 (irq = 3) is a 16550A
Aug 30 19:32:09 kevlar kernel: pty: 256 Unix98 ptys configured
Aug 30 19:32:09 kevlar kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Aug 30 19:32:09 kevlar kernel: apm: disabled - APM is not SMP safe.
Aug 30 19:32:09 kevlar kernel: Real Time Clock Driver v1.09
Aug 30 19:32:09 kevlar kernel: <Sound Blaster 16 (4.16)> at 0x220 irq 5 dma 1,5
Aug 30 19:32:09 kevlar kernel: <Sound Blaster 16> at 0x330 irq 5 dma 0
Aug 30 19:32:09 kevlar kernel: loop: registered device at major 7
Aug 30 19:32:09 kevlar kernel: PIIX4: IDE controller on PCI bus 00 dev 21
Aug 30 19:32:09 kevlar kernel: PIIX4: not 100% native mode: will probe irqs later
Aug 30 19:32:09 kevlar kernel: ide0: BM-DMA at 0xd800-0xd807, BIOS settings:
hda:DMA, hdb:pio
Aug 30 19:32:09 kevlar kernel: ide1: BM-DMA at 0xd808-0xd80f, BIOS settings:
hdc:DMA, hdd:pio
Aug 30 19:32:09 kevlar kernel: hda: Maxtor 71050 AT, ATA DISK drive
Aug 30 19:32:09 kevlar kernel: hdb: probing with STATUS(0x00) instead of
ALTSTATUS(0x50)
Aug 30 19:32:09 kevlar kernel: hdb: probing with STATUS(0x00) instead of
ALTSTATUS(0x50)
Aug 30 19:32:09 kevlar kernel: hdc: WDC AC313000R, ATA DISK drive
Aug 30 19:32:09 kevlar kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 30 19:32:09 kevlar kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 30 19:31:58 kevlar date: Mon Aug 30 19:31:58 EDT 1999
Aug 30 19:31:58 kevlar rc.sysinit: Setting clock : Mon Aug 30 19:31:58 EDT 1999
succeeded
Aug 30 19:31:58 kevlar rc.sysinit: Enabling swap space succeeded
Aug 30 19:31:58 kevlar init: Entering runlevel: 3
Aug 30 19:32:11 kevlar crond: crond startup succeeded
Aug 30 19:32:09 kevlar kernel: hda: Maxtor 71050 AT, 1006MB w/256kB Cache,
CHS=2045/16/63, DMA
Aug 30 19:32:09 kevlar kernel: hdc: WDC AC313000R, 12416MB w/512kB Cache,
CHS=25228/16/63, UDMA
Aug 30 19:32:09 kevlar kernel: Floppy drive(s): fd0 is 1.44M
Aug 30 19:32:09 kevlar kernel: FDC 0 is a post-1991 82077
Aug 30 19:32:09 kevlar kernel: ncr53c8xx: at PCI bus 0, device 11, function 0
Aug 30 19:32:09 kevlar kernel: ncr53c8xx: 53c875 detected with Symbios NVRAM
Aug 30 19:32:09 kevlar kernel: ncr53c8xx: at PCI bus 0, device 12, function 0
Aug 30 19:32:09 kevlar kernel: ncr53c8xx: 53c895 detected with Symbios NVRAM
Aug 30 19:32:09 kevlar kernel: ncr53c895-0: rev=0x01, base=0xde000000, io_port=0xb000,
irq=16
Aug 30 19:32:09 kevlar kernel: ncr53c895-0: Symbios format NVRAM, ID 7, Fast-40,
Parity Checking
Aug 30 19:32:09 kevlar kernel: ncr53c895-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 =
(hex) 07/4e/a0/01/00/24
Aug 30 19:32:09 kevlar kernel: ncr53c895-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 =
(hex) 07/8e/a0/00/08/24
Aug 30 19:32:09 kevlar kernel: ncr53c895-0: on-chip RAM at 0xdd800000
Aug 30 19:32:11 kevlar inet: inetd startup succeeded
Aug 30 19:32:09 kevlar kernel: ncr53c895-0: resetting, command processing suspended
for 2 seconds
Aug 30 19:32:09 kevlar kernel: ncr53c895-0: restart (scsi reset).
Aug 30 19:32:09 kevlar kernel: ncr53c895-0: enabling clock multiplier
Aug 30 19:32:09 kevlar kernel: ncr53c895-0: Downloading SCSI SCRIPTS.
Aug 30 19:32:09 kevlar kernel: ncr53c875-1: rev=0x03, base=0xdf000000, io_port=0xb400,
irq=17
Aug 30 19:32:09 kevlar kernel: ncr53c875-1: Symbios format NVRAM, ID 7, Fast-20,
Parity Checking
Aug 30 19:32:09 kevlar kernel: ncr53c875-1: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 =
(hex) 05/46/80/00/00/24
Aug 30 19:32:09 kevlar kernel: ncr53c875-1: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 =
(hex) 05/46/a0/00/08/24
Aug 30 19:32:09 kevlar kernel: ncr53c875-1: on-chip RAM at 0xde800000
Aug 30 19:32:09 kevlar kernel: ncr53c875-1: resetting, command processing suspended
for 2 seconds
Aug 30 19:32:09 kevlar kernel: ncr53c875-1: restart (scsi reset).
Aug 30 19:32:09 kevlar kernel: ncr53c875-1: enabling clock multiplier
Aug 30 19:32:12 kevlar keytable: Loading keymap:
Aug 30 19:32:09 kevlar kernel: ncr53c875-1: Downloading SCSI SCRIPTS.
Aug 30 19:32:09 kevlar kernel: scsi0 : ncr53c8xx - revision 3.1h
Aug 30 19:32:09 kevlar kernel: scsi1 : ncr53c8xx - revision 3.1h
Aug 30 19:32:09 kevlar kernel: scsi : 2 hosts.
Aug 30 19:32:09 kevlar kernel: ncr53c895-0: command processing resumed
Aug 30 19:32:09 kevlar kernel: ncr53c875-1: command processing resumed
Aug 30 19:32:09 kevlar kernel: Vendor: QUANTUM Model: VIKING II 4.5WLS Rev: 3506
Aug 30 19:32:09 kevlar kernel: Type: Direct-Access ANSI SCSI
revision: 02
Aug 30 19:32:09 kevlar kernel: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Aug 30 19:32:09 kevlar kernel: ncr53c895-0-<0,0>: tagged command queue depth set to 4
Aug 30 19:32:09 kevlar kernel: Vendor: PLEXTOR Model: CD-R PX-R412C Rev: 1.04
Aug 30 19:32:09 kevlar kernel: Type: CD-ROM ANSI SCSI
revision: 02
Aug 30 19:32:09 kevlar kernel: Detected scsi CD-ROM sr0 at scsi1, channel 0, id 4, lun
0
Aug 30 19:32:09 kevlar kernel: Vendor: IOMEGA Model: ZIP 100 Rev: J.03
Aug 30 19:32:09 kevlar kernel: Type: Direct-Access ANSI SCSI
revision: 02
Aug 30 19:32:09 kevlar kernel: Detected scsi removable disk sdb at scsi1, channel 0,
id 5, lun 0
Aug 30 19:32:09 kevlar kernel: Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05
Aug 30 19:32:09 kevlar kernel: Type: CD-ROM ANSI SCSI
revision: 02
Aug 30 19:32:09 kevlar kernel: Detected scsi CD-ROM sr1 at scsi1, channel 0, id 6, lun
0
Aug 30 19:32:09 kevlar kernel: scsi : detected 2 SCSI cdroms 2 SCSI disks total.
Aug 30 19:32:09 kevlar kernel: ncr53c875-1-<4,*>: FAST-10 SCSI 10.0 MB/s (100 ns,
offset 8)
Aug 30 19:32:09 kevlar kernel: sr0: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2
cdda caddy
Aug 30 19:32:09 kevlar kernel: Uniform CDROM driver Revision: 2.54
Aug 30 19:32:09 kevlar kernel: ncr53c875-1-<6,*>: FAST-20 SCSI 16.0 MB/s (62 ns,
offset 16)
Aug 30 19:32:09 kevlar kernel: sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
Aug 30 19:32:09 kevlar kernel: ncr53c895-0-<0,*>: WIDE SCSI (16 bit) enabled.
Aug 30 19:32:09 kevlar kernel: ncr53c895-0-<0,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns,
offset 31)
Aug 30 19:32:09 kevlar kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors=
8910423 [4350 MB] [4.4 GB]
Aug 30 19:32:09 kevlar kernel: ncr53c875-1-<5,*>: device did not report SYNC.
Aug 30 19:32:09 kevlar kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors=
196608 [96 MB] [0.1 GB]
Aug 30 19:32:09 kevlar kernel: sdb: Write Protect is off
Aug 30 19:32:09 kevlar kernel: PPP: version 2.3.3 (demand dialling)
Aug 30 19:32:09 kevlar kernel: TCP compression code copyright 1989 Regents of the
University of California
Aug 30 19:32:09 kevlar kernel: PPP line discipline registered.
Aug 30 19:32:09 kevlar kernel: eth0: Intel EtherExpress Pro 10/100 at 0xb800,
00:A0:C9:DA:A3:4F, IRQ 18.
Aug 30 19:32:09 kevlar kernel: Board assembly 689661-003, Physical connectors
present: RJ45
Aug 30 19:32:09 kevlar kernel: Primary interface chip i82555 PHY #1.
Aug 30 19:32:09 kevlar kernel: General self-test: passed.
Aug 30 19:32:09 kevlar kernel: Serial sub-system self-test: passed.
Aug 30 19:32:09 kevlar kernel: Internal registers self-test: passed.
Aug 30 19:32:09 kevlar kernel: ROM checksum self-test: passed (0x24c9f043).
Aug 30 19:32:09 kevlar kernel: Receiver lock-up workaround activated.
Aug 30 19:32:09 kevlar kernel: Partition check:
Aug 30 19:32:09 kevlar kernel: sda: sda1 sda3 sda4
Aug 30 19:32:09 kevlar kernel: sdb: sdb4
Aug 30 19:32:09 kevlar kernel: hda: [PTBL] [1022/32/63] hda1 hda2
Aug 30 19:32:09 kevlar kernel: hdc: [PTBL] [1582/255/63] hdc1 hdc2
Aug 30 19:32:09 kevlar kernel: NTFS version 990102
Aug 30 19:32:09 kevlar kernel: VFS: Mounted root (ext2 filesystem) readonly.
Aug 30 19:32:09 kevlar kernel: Freeing unused kernel memory: 68k freed
Aug 30 19:32:09 kevlar kernel: Adding Swap: 52448k swap-space (priority -1)
Aug 30 19:32:09 kevlar kernel: tulip.c:v0.89H 5/23/98 [EMAIL PROTECTED]
Aug 30 19:32:09 kevlar kernel: eth1: Lite-On 82c168 PNIC at 0xd000, 00 a0 cc 3e 2c 68,
IRQ 19.
Aug 30 19:32:09 kevlar kernel: eth1: MII transceiver found at MDIO address 1, config
1000 status 7809.
Aug 30 19:32:11 kevlar kernel: eth1: Changing PNIC configuration to half-duplex, CSR6
816e0000.
Aug 30 19:32:03 kevlar ifup: done.
Aug 30 19:32:05 kevlar ifup: search cc.gettysburg.edu gettysburg.edu
Aug 30 19:32:05 kevlar network: Bringing up interface eth0 succeeded
Aug 30 19:32:08 kevlar network: Bringing up interface eth1 succeeded
Aug 30 19:32:08 kevlar network: Bringing up interface ppp0 succeeded
Aug 30 19:32:09 kevlar random: Initializing random number generator succeeded
Aug 30 19:32:16 kevlar keytable: Loading system font:
Aug 30 19:32:16 kevlar rc: Starting keytable succeeded
Aug 30 19:32:17 kevlar sendmail: sendmail startup succeeded
Aug 30 19:32:17 kevlar gpm: gpm startup succeeded
Aug 30 19:32:18 kevlar httpd: httpd startup succeeded
Aug 30 19:32:18 kevlar sound: Starting sound configuration:
Aug 30 19:32:18 kevlar sound: sound
Aug 30 19:32:18 kevlar sound:
Aug 30 19:32:18 kevlar rc: Starting sound succeeded
Aug 30 19:32:19 kevlar PAM_pwdb[628]: (su) session opened for user xfs by (uid=0)
Aug 30 19:32:20 kevlar PAM_pwdb[628]: (su) session closed for user xfs
Aug 30 19:32:20 kevlar xfs: xfs startup succeeded
<Stop messages File>
<Start mount error>
[root@kevlar /root]# mount -t iso9660 /dev/scd1 /mnt/scd1
mount: block device /dev/scd1 is write-protected, mounting read-only
scsi1 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 1 channel 0.
ncr53c8xx_reset: pid=4556 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c875-1: resetting, command processing suspended for 2 seconds
scsi1: device driver called scsi_done() for a syncronous reset.
ncr53c875-1: enabling clock multiplier
ncr53c875-1: Downloading SCSI SCRIPTS.
ncr53c875-1: command processing resumed
CD-ROM I/O error: dev 0b:01, sector 64
isofs_read_super: bread failed, dev=0b:01, iso_blknum=16, block=32
mount: wrong fs type, bad option, bad superblock on /dev/scd1,
or too many mounted file systems
<Stop mount error>
<Start messages File after mount attempt>
Aug 30 19:42:33 kevlar kernel: scsi1 channel 0 : resetting for second half of retries.
Aug 30 19:42:34 kevlar kernel: SCSI bus is being reset for host 1 channel 0.
Aug 30 19:42:34 kevlar kernel: ncr53c8xx_reset: pid=4556 reset_flags=1 serial_number=0
serial_number_at_timeout=0
Aug 30 19:42:34 kevlar kernel: ncr53c875-1: resetting, command processing suspended
for 2 seconds
Aug 30 19:42:34 kevlar kernel: scsi1: device driver called scsi_done() for a
syncronous reset.
Aug 30 19:42:34 kevlar kernel: ncr53c875-1: restart (scsi reset).
Aug 30 19:42:34 kevlar kernel: ncr53c875-1: enabling clock multiplier
Aug 30 19:42:34 kevlar kernel: ncr53c875-1: Downloading SCSI SCRIPTS.
Aug 30 19:42:34 kevlar kernel: ncr53c875-1: command processing resumed
Aug 30 19:42:34 kevlar kernel: ncr53c875-1-<6,*>: FAST-20 SCSI 16.0 MB/s (62 ns,
offset 16)
Aug 30 19:42:34 kevlar kernel: sr1: CD-ROM not ready. Make sure you have a disc in
the drive.
Aug 30 19:42:34 kevlar kernel: CD-ROM I/O error: dev 0b:01, sector 64
Aug 30 19:42:34 kevlar kernel: isofs_read_super: bread failed, dev=0b:01,
iso_blknum=16, block=32
Aug 30 19:42:34 kevlar kernel: Device not ready. Make sure there is a disc in the
drive.
<Stop messages File after mount attempt>
Anyone have any ideas? Am I doing something completely wrong?? If I am,
please let me know, because I've been baffled by this for about 9 months
now. Thanks
~~Kev
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
