Okay someone suggested I try changing ide1 and I went one step farther
and still 2.2.10 locks up even without ide1 so that tosses that idea out
the window.
I'm d/ling 2.2.13 is there anything new in the scsi part of the kernel
that could help with this problem I really need to get this PCI scsi card
working.
Thanks for the few comments.
Terry
On Mon, 25 Oct 1999 [EMAIL PROTECTED] wrote:
> Help please.
> I got a Kouwell Ultra SCSI PCI card and the driver isn't working it locks
> the kernel and I have to hard boot.
> RedHat 5.2
> Kernel 2.2.10
> AMD K6-2 450
> Soyo MB.
> Initio 9400 based scsi card.
> Thanks for any advice.
> I've compiled the driver as module and statically and it locks up
> everytime.
> If it will help heres my /proc/pci for it.
>
> Bus 0, device 9, function 0:
> SCSI storage controller: Initio Corp Unknown device (rev 1).
> Vendor id=1101. Device id=9400.
> Medium devsel. IRQ 9. Master Capable. Latency=64.
> I/O at 0xe800 [0xe801].
> Non-prefetchable 32 bit memory at 0xc8000000 [0xc8000000].
>
> Thanks
> Terry
> [EMAIL PROTECTED]
>
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
