Omar Armas Aleman <[EMAIL PROTECTED]> wrote:
> I have a machine with hot swap, every time I add or remove a disk I have
I assume this is not RAID, and you have proper cabling allowing
SCSI hot-swap (SCSI is not hot-swap by default).
> to reset the machine so linux recognizes the new configuration. (I tried
> unloading and reloading the scsi module, but didn't work)
It should work (the low-level driver). Something more flexible is the
echo 'scsi remove-single-device 0 0 1 0' > /proc/scsi/scsi and then
echo 'scsi add-single-device 0 0 1 0' > /proc/scsi/scsi
if you are tweaking SCSI ID 1.
This is documented in drivers/scsi/scsi.c I think.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
