I have a Clariion 5300 box configured with DISK, RAID 0, RAID 1, RAID 5 on
different LUNs. I am running RH Linux 6.1 (Linux 2.2.12-20) with Agilent FC
HBA and driver. It sees all LUNS and IO test running OK. The driver is also
being tested for Brocade swtich with JBODs without any problem. I don't
think the problem is from scsi later.
-eddie
-----Original Message-----
From: Hoot Thompson [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 08, 2000 8:23 AM
To: [EMAIL PROTECTED]
Subject: Problem
I'm working on a SAN infrastructure and I'm having difficulty getting
SGI/Clariion RAID systems to be recognized by the Linux machines attached to
the Brocade switch fabric. IRIX and NT boxes see the RAID just fine but the
Linux boxes do not. The two SGI/Clariion SP wwn's show up in qlogic port
database using the UNH driver. Later on however, the LUNs are recognized as
generic scsi devices as opposed to scsi disks. It was suggested that
perhaps the problem is in the scsi layer. BTW a Ciprico RAID attached to
the fabric is seen by the Linux machines.
Any suggestions are welcome,
Hoot Thompson
Patuxent Technology Partners, LLC
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
