Hi,
I got some error messages in my syslog file, but I can't understand the
output information about SCSI disk major and minor number.
In the last line, "dev 08:15" stand for the major and minor device
number.
But my error occurred on /dev/sdb5, I think they should be 08:21, what's
wrong with this?
PS. The wrong time stamp is because my experiment.
Dec 31 16:37:11 tom kernel: (scsi0) <Adaptec AHA-294X Ultra SCSI host
adapter> found at PCI 11/0
Dec 31 16:37:11 tom kernel: (scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
Dec 31 16:37:11 tom kernel: (scsi0) Downloading sequencer code... 413
instructions downloaded
Dec 31 16:37:11 tom kernel: scsi0 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.15/3.2.4
Dec 31 16:37:11 tom kernel: <Adaptec AHA-294X Ultra SCSI host
adapter>
Dec 31 16:37:11 tom kernel: scsi : 1 host.
Dec 31 16:37:11 tom kernel: (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec,
offset 15.
Dec 31 16:37:11 tom kernel: Vendor: SEAGATE Model: ST34520N
Rev: 1498
Dec 31 16:37:11 tom kernel: Type: Direct-Access
ANSI SCSI revision: 02
Dec 31 16:37:11 tom kernel: Detected scsi disk sda at scsi0, channel 0,
id 0, lun 0
Dec 31 16:37:11 tom kernel: (scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec,
offset 8.
Dec 31 16:37:11 tom kernel: Vendor: IBM Model: DDRS-34560D
Rev: DC1B
Dec 31 16:37:11 tom kernel: Type: Direct-Access
ANSI SCSI revision: 02
Dec 31 16:37:11 tom kernel: Detected scsi disk sdb at scsi0, channel 0,
id 1, lun 0
Dec 31 16:37:11 tom kernel: (scsi0:0:6:0) Using asynchronous transfers.
Dec 31 16:37:11 tom kernel: Vendor: ANRITSU Model: DMT780C1D
Rev: M090
Dec 31 16:37:11 tom kernel: Type: Sequential-Access
ANSI SCSI revision: 01
Dec 31 16:37:11 tom kernel: Detected scsi tape st0 at scsi0, channel 0,
id 6, lun 0
Dec 31 16:37:11 tom kernel: SCSI device sda: hdwr sector= 512 bytes.
Sectors= 8888924 [4340 MB] [4.3 GB]
Dec 31 16:37:11 tom kernel: sda: sda1 sda2 < sda5 >
Dec 31 16:37:11 tom kernel: SCSI device sdb: hdwr sector= 512 bytes.
Sectors= 8925000 [4357 MB] [4.4 GB]
Dec 31 16:37:11 tom kernel: sdb: sdb1 sdb2 < sdb5 sdb6 >
Dec 31 16:37:11 tom kernel: autodetecting RAID arrays
Dec 31 16:37:11 tom kernel: autorun ...
Dec 31 16:37:11 tom kernel: ... autorun DONE.
.......
Dec 31 16:42:55 tom kernel: (scsi0:0:1:0) Performing Domain validation.
Dec 31 16:42:55 tom kernel: SCSI disk error : host 0 channel 0 id 1 lun
0 return code = 26030000
Dec 31 16:42:55 tom kernel: scsidisk I/O error: dev 08:15, sector 0
.......
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
