Thanks for advices, but I found the problem. The interesting is that
after installing new modem my mouse port became COM2. After changing the
/dev/mouse to /dev/ttyS1 mouse is working fine, without any problems.
Modem is working well too on irq 5 ,after running /etc/rc.d/rc.serial.
Regards
Areg
JP> check the settings for gpm in /etc/rc.d/rc.local
JP> On Wed, 1 Mar 2000, bear wrote:
>> I've installed a Slackware Linux few weeks ago. At first mouse was
>> working ok. But when I changed my modem (USR Sportser Winmodem to USR Sportser Fax
>> PC 14400), which is sitting on COM3 (in ISA slot), my mouse stopped
>> responding. I tried different mouse types in gpm, but nothing... Mouse
>> is on COM1, using IRQ4 & modem is using IRQ5, SO there is no way them
>> to conflict together. Both mouse & modem are working perfectly in
>> MS Windows.
>> Can anybody explain,why is this problem?
>>
>>
>>
>> --
>> Best regards,
>> bear mailto:[EMAIL PROTECTED]
>>
>>
>>
>> -
>> To unsubscribe from this list: send the line "unsubscribe linux-serial" in
>> the body of a message to [EMAIL PROTECTED]
>>
--
Best regards,
bear mailto:[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to [EMAIL PROTECTED]
