Linux-Setup Digest #909, Volume #19 Thu, 26 Oct 00 13:13:11 EDT
Contents:
Re: RAID 1 ?? ("Bill Shirley")
Re: vpop3d over a single IP? (David Coulson)
Re: Linux System Time - NEWBIE ("Bill Shirley")
----------------------------------------------------------------------------
From: "Bill Shirley" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.hardware,tw.bbs.comp.linux
Subject: Re: RAID 1 ??
Date: Thu, 26 Oct 2000 12:53:00 -0400
Looks ok to me, but I'm no guru. What does cat /proc/mdstat say? Mine
looks like:
[root@elmo /root]# cat /proc/mdstat
Personalities : [raid1]
read_ahead 1024 sectors
md1 : active raid1 hdc1[1] hda1[0] 19767872 blocks [2/2] [UU]
md3 : active raid1 hdc3[1] hda3[0] 24000 blocks [2/2] [UU]
unused devices: <none>
HTH,
Bill
" �j��" <[EMAIL PROTECTED]> wrote in message
news:8t9ft7$csu$[EMAIL PROTECTED]...
> Hi All,
>
> I'm trying to config a PC with 3 SCSI disks, 1 is 9.1GB , and the remain
> is 18.2GB each. I would like to create a RAID 1 (mirror) for the 2 18.2GB
> disks
> so, I grabbed the 2.4.0-test9 kernel for testing. But during the lilo boot
> process, I saw alot of "Oct 26 22:23:48 cheetah kernel: (checking disk #)"
,
> what does this mean ?
>
> Oct 26 22:23:48 cheetah kernel: raid1: device sdc1 operational as mirror
1
> Oct 26 22:23:48 cheetah kernel: raid1: device sdb1 operational as mirror
0
>
> I have configurated it with RAID 1 only, why it show sdb1 operational as
> mirror 0 ??
>
>
> Rgds,
> Simon.H
>
> --------------------------------------------------------------------------
--
> --------------------------------------------------------------------------
--
> ----------------------------
> Oct 26 22:23:48 cheetah kernel: Linux version 2.4.0-test9 (root@cheetah)
> (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 Wed Oct 25 19:37:35
HKT
> 2000
> Oct 26 22:23:48 cheetah kernel: BIOS-provided physical RAM map:
> Oct 26 22:23:48 cheetah kernel: BIOS-e820: 00000000000a0000 @
> 0000000000000000 (usable)
> Oct 26 22:23:48 cheetah kernel: BIOS-e820: 0000000000010000 @
> 00000000000f0000 (reserved)
> Oct 26 22:23:48 cheetah kernel: BIOS-e820: 000000000fefe000 @
> 0000000000100000 (usable)
> Oct 26 22:23:48 cheetah kernel: BIOS-e820: 0000000000002000 @
> 000000000fffe000 (reserved)
> Oct 26 22:23:48 cheetah kernel: BIOS-e820: 0000000000080000 @
> 00000000fff80000 (reserved)
> Oct 26 22:23:48 cheetah kernel: BIOS-e820: 0000000000010000 @
> 00000000fec00000 (reserved)
> Oct 26 22:23:48 cheetah kernel: BIOS-e820: 0000000000010000 @
> 00000000fee00000 (reserved)
> Oct 26 22:23:48 cheetah kernel: On node 0 totalpages: 65534
> Oct 26 22:23:48 cheetah kernel: zone(0): 4096 pages.
> Oct 26 22:23:48 cheetah kernel: zone(1): 61438 pages.
> Oct 26 22:23:48 cheetah kernel: zone(2): 0 pages.
> Oct 26 22:23:48 cheetah kernel: Kernel command line: auto BOOT_IMAGE=Linux
> ro root=802 BOOT_FILE=/vmlinuz
> Oct 26 22:23:48 cheetah kernel: Initializing CPU#0
> Oct 26 22:23:48 cheetah kernel: Detected 797.541 MHz processor.
> Oct 26 22:23:48 cheetah kernel: Console: colour VGA+ 80x25
> Oct 26 22:23:48 cheetah kernel: Calibrating delay loop... 1592.52 BogoMIPS
> Oct 26 22:23:48 cheetah kernel: Memory: 255672k/262136k available (1242k
> kernel code, 6080k reserved, 91k data, 168k init, 0k highmem)
> Oct 26 22:23:48 cheetah kernel: Dentry-cache hash table entries: 32768
> (order: 6, 262144 bytes)
> Oct 26 22:23:48 cheetah kernel: Buffer-cache hash table entries: 16384
> (order: 4, 65536 bytes)
> Oct 26 22:23:48 cheetah kernel: Page-cache hash table entries: 65536
(order:
> 6, 262144 bytes)
> Oct 26 22:23:48 cheetah kernel: Inode-cache hash table entries: 16384
> (order: 5, 131072 bytes)
> Oct 26 22:23:48 cheetah kernel: CPU: Intel Pentium III (Coppermine)
stepping
> 06
> Oct 26 22:23:48 cheetah kernel: Enabling fast FPU save and restore...
done.
> Oct 26 22:23:48 cheetah kernel: Enabling unmasked SIMD FPU exception
> support... done.
> Oct 26 22:23:48 cheetah kernel: Checking 'hlt' instruction... OK.
> Oct 26 22:23:48 cheetah kernel: POSIX conformance testing by UNIFIX
> Oct 26 22:23:48 cheetah kernel: PCI: PCI BIOS revision 2.10 entry at
> 0xfc79e, last bus=1
> Oct 26 22:23:48 cheetah kernel: PCI: Using configuration type 1
> Oct 26 22:23:48 cheetah kernel: PCI: Probing PCI hardware
> Oct 26 22:23:48 cheetah kernel: PCI: ServerWorks host bridge: secondary
bus
> 00
> Oct 26 22:23:48 cheetah kernel: PCI: ServerWorks host bridge: secondary
bus
> 01
> Oct 26 22:23:48 cheetah kernel: PCI: Using IRQ router default [1166/0200]
at
> 00:0f.0
> Oct 26 22:23:48 cheetah kernel: Linux NET4.0 for Linux 2.4
> Oct 26 22:23:48 cheetah kernel: Based upon Swansea University Computer
> Society NET3.039
> Oct 26 22:23:48 cheetah kernel: NET4: Unix domain sockets 1.0/SMP for
Linux
> NET4.0.
> Oct 26 22:23:48 cheetah kernel: NET4: Linux TCP/IP 1.0 for NET4.0
> Oct 26 22:23:48 cheetah kernel: IP Protocols: ICMP, UDP, TCP
> Oct 26 22:23:48 cheetah kernel: IP: routing cache hash table of 2048
> buckets, 16Kbytes
> Oct 26 22:23:48 cheetah kernel: TCP: Hash tables configured (established
> 16384 bind 16384)
> Oct 26 22:23:48 cheetah kernel: ACPI: "DELL" found at 0x000fdc90
> Oct 26 22:23:48 cheetah kernel: Starting kswapd v1.8
> Oct 26 22:23:48 cheetah kernel: ACPI: "DELL" found at 0x000fdc90
> Oct 26 22:23:48 cheetah kernel: Starting kswapd v1.8
> Oct 26 22:23:48 cheetah kernel: pty: 256 Unix98 ptys configured
> Oct 26 22:23:48 cheetah kernel: Uniform Multi-Platform E-IDE driver
> Revision: 6.31
> Oct 26 22:23:48 cheetah kernel: ide: Assuming 33MHz system bus speed for
PIO
> modes; override with idebus=xx
> Oct 26 22:23:48 cheetah kernel: PCI_IDE: unknown IDE controller on PCI bus
> 00 device 79, VID=1166, DID=0211
> Oct 26 22:23:48 cheetah kernel: PCI_IDE: chipset revision 0
> Oct 26 22:23:48 cheetah kernel: PCI_IDE standard IDE storage device
detected
> Oct 26 22:23:48 cheetah kernel: hda: CRD-8482B, ATAPI CDROM drive
> Oct 26 22:23:48 cheetah kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Oct 26 22:23:48 cheetah kernel: hda: ATAPI 48X CD-ROM drive, 128kB Cache
> Oct 26 22:23:48 cheetah kernel: Uniform CD-ROM driver Revision: 3.11
> Oct 26 22:23:48 cheetah kernel: Floppy drive(s): fd0 is 1.44M
> Oct 26 22:23:48 cheetah kernel: FDC 0 is a National Semiconductor PC87306
> Oct 26 22:23:48 cheetah kernel: Serial driver version 5.02 (2000-08-09)
with
> MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
> Oct 26 22:23:48 cheetah kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
> Oct 26 22:23:48 cheetah kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Oct 26 22:23:48 cheetah kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> Oct 26 22:23:48 cheetah kernel: eepro100.c: $Revision: 1.33 $ 2000/05/24
> Modified by Andrey V. Savochkin <[EMAIL PROTECTED]> and others
> Oct 26 22:23:48 cheetah kernel: eth0: Intel Corporation 82557 [Ethernet
Pro
> 100], 00:B0:D0:78:A7:5D, IRQ 11.
> Oct 26 22:23:48 cheetah kernel: Board assembly 07195d-000, Physical
> connectors present: RJ45
> Oct 26 22:23:48 cheetah kernel: Primary interface chip i82555 PHY #1.
> Oct 26 22:23:48 cheetah kernel: General self-test: passed.
> Oct 26 22:23:48 cheetah kernel: Serial sub-system self-test: passed.
> Oct 26 22:23:48 cheetah kernel: Internal registers self-test: passed.
> Oct 26 22:23:48 cheetah kernel: ROM checksum self-test: passed
> (0x04f4518b).
> Oct 26 22:23:48 cheetah kernel: Receiver lock-up workaround activated.
> Oct 26 22:23:48 cheetah kernel: SCSI subsystem driver Revision: 1.00
> Oct 26 22:23:48 cheetah kernel: (scsi0) <Adaptec AIC-7899 Ultra 160/m SCSI
> host adapter> found at PCI 1/2/0
> Oct 26 22:23:48 cheetah kernel: (scsi0) Wide Channel A, SCSI ID=7, 32/255
> SCBs
> Oct 26 22:23:48 cheetah kernel: (scsi0) Downloading sequencer code... 392
> instructions downloaded
> Oct 26 22:23:48 cheetah kernel: (scsi1) <Adaptec AIC-7899 Ultra 160/m SCSI
> host adapter> found at PCI 1/2/1
> Oct 26 22:23:48 cheetah kernel: (scsi1) Wide Channel B, SCSI ID=7, 32/255
> SCBs
> Oct 26 22:23:48 cheetah kernel: (scsi1) Downloading sequencer code... 392
> instructions downloaded
> Oct 26 22:23:48 cheetah kernel: scsi0 : Adaptec AHA274x/284x/294x
> (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
> Oct 26 22:23:48 cheetah kernel: <Adaptec AIC-7899 Ultra 160/m SCSI
> host adapter>
> Oct 26 22:23:48 cheetah kernel: scsi1 : Adaptec AHA274x/284x/294x
> (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
> Oct 26 22:23:48 cheetah kernel: <Adaptec AIC-7899 Ultra 160/m SCSI
> host adapter>
> Oct 26 22:23:48 cheetah kernel: (scsi0:0:0:0) Synchronous at 80.0
Mbyte/sec,
> offset 63.
> Oct 26 22:23:48 cheetah kernel: Vendor: QUANTUM Model: ATLAS V 9 WLS
> Rev: 0201
> Oct 26 22:23:48 cheetah kernel: Type: Direct-Access
> ANSI SCSI revision: 03
> Oct 26 22:23:48 cheetah kernel: (scsi0:0:1:0) Synchronous at 160.0
> Mbyte/sec, offset 63.
> Oct 26 22:23:48 cheetah kernel: Vendor: SEAGATE Model: ST318404LW
> Rev: 0002
> Oct 26 22:23:48 cheetah kernel: Type: Direct-Access
> ANSI SCSI revision: 03
> Oct 26 22:23:48 cheetah kernel: (scsi0:0:2:0) Synchronous at 160.0
> Mbyte/sec, offset 63.
> Oct 26 22:23:48 cheetah kernel: Vendor: SEAGATE Model: ST318404LW
> Rev: 0002
> Oct 26 22:23:48 cheetah kernel: Type: Direct-Access
> ANSI SCSI revision: 03
> Oct 26 22:23:48 cheetah kernel: Detected scsi disk sda at scsi0, channel
0,
> id 0, lun 0
> Oct 26 22:23:48 cheetah kernel: Detected scsi disk sdb at scsi0, channel
0,
> id 1, lun 0
> Oct 26 22:23:48 cheetah kernel: Detected scsi disk sdc at scsi0, channel
0,
> id 2, lun 0
> Oct 26 22:23:48 cheetah kernel: SCSI device sda: 17783249 512-byte hdwr
> sectors (9105 MB)
> Oct 26 22:23:48 cheetah kernel: Partition check:
> Oct 26 22:23:48 cheetah kernel: sda: sda1 sda2 sda3 < sda5 sda6 >
> Oct 26 22:23:48 cheetah kernel: SCSI device sdb: 35843670 512-byte hdwr
> sectors (18352 MB)
> Oct 26 22:23:48 cheetah kernel: sdb: sdb1
> Oct 26 22:23:48 cheetah kernel: SCSI device sdb: 35843670 512-byte hdwr
> sectors (18352 MB)
> Oct 26 22:23:48 cheetah kernel: sdb: sdb1
> Oct 26 22:23:48 cheetah kernel: SCSI device sdc: 35843670 512-byte hdwr
> sectors (18352 MB)
> Oct 26 22:23:48 cheetah kernel: sdc: sdc1
> Oct 26 22:23:48 cheetah kernel: Linux PCMCIA Card Services 3.1.20
> Oct 26 22:23:48 cheetah kernel: options: [pci] [cardbus] [pm]
> Oct 26 22:23:48 cheetah kernel: md driver 0.90.0 MAX_MD_DEVS=256,
> MAX_REAL=12
> Oct 26 22:23:48 cheetah kernel: raid1 personality registered
> Oct 26 22:23:48 cheetah kernel: md.c: sizeof(mdp_super_t) = 4096
> Oct 26 22:23:48 cheetah kernel: autodetecting RAID arrays
> Oct 26 22:23:48 cheetah kernel: (read) sdb1's sb offset: 17920384 [events:
> 00000006]
> Oct 26 22:23:48 cheetah kernel: (read) sdc1's sb offset: 17920384 [events:
> 00000006]
> Oct 26 22:23:48 cheetah kernel: autorun ...
> Oct 26 22:23:48 cheetah kernel: considering sdc1 ...
> Oct 26 22:23:48 cheetah kernel: adding sdc1 ...
> Oct 26 22:23:48 cheetah kernel: adding sdb1 ...
> Oct 26 22:23:48 cheetah kernel: created md0
> Oct 26 22:23:48 cheetah kernel: bind<sdb1,1>
> Oct 26 22:23:48 cheetah kernel: bind<sdc1,2>
> Oct 26 22:23:48 cheetah kernel: running: <sdc1><sdb1>
> Oct 26 22:23:48 cheetah kernel: now!
> Oct 26 22:23:48 cheetah kernel: sdc1's event counter: 00000006
> Oct 26 22:23:48 cheetah kernel: sdb1's event counter: 00000006
> Oct 26 22:23:48 cheetah kernel: md0: max total readahead window set to
124k
> Oct 26 22:23:48 cheetah kernel: md0: 1 data-disks, max readahead per
> data-disk: 124k
> Oct 26 22:23:48 cheetah kernel: raid1: device sdc1 operational as mirror 1
> Oct 26 22:23:48 cheetah kernel: raid1: device sdb1 operational as mirror 0
> Oct 26 22:23:48 cheetah kernel: (checking disk 0)
> Oct 26 22:23:48 cheetah kernel: (really checking disk 0)
> Oct 26 22:23:48 cheetah kernel: (checking disk 1)
> Oct 26 22:23:48 cheetah kernel: (really checking disk 1)
> Oct 26 22:23:48 cheetah kernel: (checking disk 2)
> Oct 26 22:23:48 cheetah kernel: (checking disk 3)
> Oct 26 22:23:48 cheetah kernel: (checking disk 4)
> Oct 26 22:23:48 cheetah kernel: (checking disk 5)
> Oct 26 22:23:48 cheetah kernel: (checking disk 6)
> Oct 26 22:23:48 cheetah kernel: (checking disk 7)
> Oct 26 22:23:48 cheetah kernel: (checking disk 8)
> Oct 26 22:23:48 cheetah kernel: (checking disk 9)
> Oct 26 22:23:48 cheetah kernel: (checking disk 10)
> Oct 26 22:23:48 cheetah kernel: (checking disk 11)
> Oct 26 22:23:48 cheetah kernel: (checking disk 12)
> Oct 26 22:23:48 cheetah kernel: (checking disk 13)
> Oct 26 22:23:48 cheetah kernel: (checking disk 14)
> Oct 26 22:23:48 cheetah kernel: (checking disk 15)
> Oct 26 22:23:48 cheetah kernel: (checking disk 16)
> Oct 26 22:23:48 cheetah kernel: (checking disk 17)
> Oct 26 22:23:48 cheetah kernel: (checking disk 18)
> Oct 26 22:23:48 cheetah kernel: (checking disk 19)
> Oct 26 22:23:48 cheetah kernel: (checking disk 20)
> Oct 26 22:23:48 cheetah kernel: (checking disk 21)
> Oct 26 22:23:48 cheetah kernel: (checking disk 22)
> Oct 26 22:23:48 cheetah kernel: (checking disk 23)
> Oct 26 22:23:48 cheetah kernel: (checking disk 24)
> Oct 26 22:23:48 cheetah kernel: (checking disk 25)
> Oct 26 22:23:48 cheetah kernel: (checking disk 26)
> Oct 26 22:23:48 cheetah kernel: raid1: device sdb1 operational as mirror 0
> Oct 26 22:23:48 cheetah kernel: (checking disk 0)
> Oct 26 22:23:48 cheetah kernel: (really checking disk 0)
> Oct 26 22:23:48 cheetah kernel: (checking disk 1)
> Oct 26 22:23:48 cheetah kernel: (really checking disk 1)
> Oct 26 22:23:48 cheetah kernel: (checking disk 2)
> Oct 26 22:23:48 cheetah kernel: (checking disk 3)
> Oct 26 22:23:48 cheetah kernel: (checking disk 4)
> Oct 26 22:23:48 cheetah kernel: (checking disk 5)
> Oct 26 22:23:48 cheetah kernel: (checking disk 6)
> Oct 26 22:23:48 cheetah kernel: (checking disk 7)
> Oct 26 22:23:48 cheetah kernel: (checking disk 8)
> Oct 26 22:23:48 cheetah kernel: (checking disk 9)
> Oct 26 22:23:48 cheetah kernel: (checking disk 10)
> Oct 26 22:23:48 cheetah kernel: (checking disk 11)
> Oct 26 22:23:48 cheetah kernel: (checking disk 12)
> Oct 26 22:23:48 cheetah kernel: (checking disk 13)
> Oct 26 22:23:48 cheetah kernel: (checking disk 14)
> Oct 26 22:23:48 cheetah kernel: (checking disk 15)
> Oct 26 22:23:48 cheetah kernel: (checking disk 16)
> Oct 26 22:23:48 cheetah kernel: (checking disk 17)
> Oct 26 22:23:48 cheetah kernel: (checking disk 18)
> Oct 26 22:23:48 cheetah kernel: (checking disk 19)
> Oct 26 22:23:48 cheetah kernel: (checking disk 20)
> Oct 26 22:23:48 cheetah kernel: (checking disk 21)
> Oct 26 22:23:48 cheetah kernel: (checking disk 22)
> Oct 26 22:23:48 cheetah kernel: (checking disk 23)
> Oct 26 22:23:48 cheetah kernel: (checking disk 24)
> Oct 26 22:23:48 cheetah kernel: (checking disk 25)
> Oct 26 22:23:48 cheetah kernel: (checking disk 26)
> Oct 26 22:23:48 cheetah kernel: raid1: raid set md0 active with 2 out of 2
> mirrors
> Oct 26 22:23:48 cheetah kernel: md: updating md0 RAID superblock on device
> Oct 26 22:23:48 cheetah kernel: sdc1 [events: 00000007](write) sdc1's sb
> offset: 17920384
> Oct 26 22:23:48 cheetah kernel: sdb1 [events: 00000007](write) sdb1's sb
> offset: 17920384
> Oct 26 22:23:48 cheetah kernel: .
> Oct 26 22:23:48 cheetah kernel: ... autorun DONE.
> Oct 26 22:23:48 cheetah kernel: ds: no socket drivers loaded!
> Oct 26 22:23:48 cheetah kernel: VFS: Mounted root (ext2 filesystem)
> readonly.
> Oct 26 22:23:48 cheetah kernel: Freeing unused kernel memory: 168k freed
> Oct 26 22:23:48 cheetah kernel: Adding Swap: 128484k swap-space
> (priority -1)
> Oct 26 22:23:49 cheetah /usr/sbin/cron[153]: (CRON) INFO (pidfile fd = 3)
> Oct 26 22:23:49 cheetah /usr/sbin/cron[154]: (CRON) STARTUP (fork ok)
> --------------------------------------------------------------------------
--
> --------------------------------------------------------------------------
--
> ----------------------------
>
>
------------------------------
From: David Coulson <[EMAIL PROTECTED]>
Crossposted-To: comp.mail.sendmail,comp.os.linux.networking
Subject: Re: vpop3d over a single IP?
Date: Thu, 26 Oct 2000 17:54:52 +0100
[EMAIL PROTECTED] wrote:
> Now, my IP space (16 total) is getting crowded so I started to move some
> virtual domains over to a single IP. Virtual web and ftp have no
> problem with that, but I couldn't get virtual email to work.
Not sure about your pop3 problem, but I'd love to know how you got name
based (rather than IP based) ftp virtual hosting to work, as there is no
provision within the standard FTP protocol for such as service (I
think).
--
David Coulson
[EMAIL PROTECTED]
------------------------------
From: "Bill Shirley" <[EMAIL PROTECTED]>
Subject: Re: Linux System Time - NEWBIE
Date: Thu, 26 Oct 2000 13:01:48 -0400
This is a multi-part message in MIME format.
=======_NextPart_000_0079_01C03F4C.E6D113A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
That's because you have your system clock set to local time and you have =
told linux it is set
to GMT. Set your system clock to GMT unless you dual-boot. In that =
case tell linux the system
clock is local time. My guess is with linuxconf.
HTH,
Bill
"A.J. Simpkin" <[EMAIL PROTECTED]> wrote in message =
news:[EMAIL PROTECTED]...
My hardware clock has the right time but the system time is off by =
5hrs. Any Advice?=20
Mandrake7.0 is the flavour du jour. Pls. email response if =
convenient.=20
--=20
"Even amidst fierce flames the golden lotus can be planted."
Guess the tombstone and win a prize!
--
=20
=======_NextPart_000_0079_01C03F4C.E6D113A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4207.2601" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>That's because you have your system =
clock set to=20
local time and you have told linux it is set</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>to GMT. Set your system clock to =
GMT unless=20
you dual-boot. In that case tell linux the system</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>clock is local time. My guess is =
with=20
linuxconf.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>HTH,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Bill</FONT></DIV>
<DIV> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"A.J. Simpkin" <<A =
href=3D"mailto:[EMAIL PROTECTED]">[EMAIL PROTECTED]</A>>=20
wrote in message <A=20
=
href=3D"news:[EMAIL PROTECTED]">news:39F7F90B.CE516009@fairtax=
.ca</A>...</DIV>My=20
hardware clock has the right time but the system time is off by =
5hrs. =20
Any Advice?=20
<P>Mandrake7.0 is the flavour du jour. Pls. email response if=20
convenient. <PRE>--
"Even amidst fierce flames the golden lotus can be planted."
Guess the tombstone and win a prize!
--</PRE> </BLOCKQUOTE></BODY></HTML>
=======_NextPart_000_0079_01C03F4C.E6D113A0==
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.setup) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Setup Digest
******************************
