Linux-Setup Digest #447, Volume #20 Thu, 18 Jan 01 12:13:13 EST
Contents:
Re: scsi emulation problem... (Larry Condon)
Re: Term emulator with *real* keypad emulation? (Thomas Dickey)
Re: Video Card problems ("Chris")
insmod problems . . . (ekk)
HP LaserJet 4 configuration issue (Matt McKnight III)
recompiling kernel and PCMCIA support - how? (Michal Szymanski)
kernel 2.4.0 and AICXXX (=?ISO-8859-1?Q?Rasmus_B=F8g_Hansen?=)
Re: Partitioning using Disk Druid (Dave Barnett)
Re: installing linux with windows 2000 (Alexis Dimitriadis)
Re: Stopping lpd Fails After Renaming Computer in redhat 7.0 ("Meron Lavie")
What is dnetc?? ([EMAIL PROTECTED])
2.4 kernel 2.4 ppp cannot connect ("duke n maria")
Re: What is dnetc?? (=?ISO-8859-1?Q?Rasmus_B=F8g_Hansen?=)
Re: What is dnetc?? ([EMAIL PROTECTED])
Streaming video help (Marble Head)
Re: Help needed with installing new 2.4 kernel ("Werner Fangmeier")
Re: What is dnetc?? (Thomas Rasmussen)
Re: Help! Beginner c++ compiling problem in RH7.0 (Bill Hudson)
Re: What is dnetc?? ("Peter van Kampen")
Re: What is dnetc?? ([EMAIL PROTECTED])
Re: Recreate kernel .config-file for existing redhat7-kernel ("Werner Fangmeier")
Re: What is dnetc?? ("AndyW")
kdevelop compilation under Mandrake7.2: qt2 problem. (Julien Verchere)
Re: where to install kernel sources ("ne...")
----------------------------------------------------------------------------
From: Larry Condon <[EMAIL PROTECTED]>
Crossposted-To: linux.redhat,linux.redhat.misc,comp.os.linux.misc
Subject: Re: scsi emulation problem...
Date: Thu, 18 Jan 2001 09:21:53 -0500
Did you change your /etc/fstab emtry to reflect the change to /dev/scd0?
Try #mount /dev/scd0 / -t iso9660 /your/mount_point. If that works it's
probably an fstab problem.
Rinaldi on someone else's box.
Mal Whitten wrote:
> Thanks for that. I think that I have recompiled the kernel scsi modules
> correctly. I was really fishing to see if anyone else had experienced
> similar problems.
>
> Mal.
>
> "BIANCO ROBERTO" <[EMAIL PROTECTED]> wrote in message
> news:945933$8kh$[EMAIL PROTECTED]...
> > check out
> >
> > www.guug.de:8080/cgi-bin/winni/lsc-orig.pl
> >
> > to find out what hardware goes with which version of cdrecord and with
> > which version of the kernel.
> >
> >
> > In article <[EMAIL PROTECTED]>,
> > Ben Bergen <[EMAIL PROTECTED]> wrote:
> > >I am trying to set up scsi emulation on my dell inspiron 5000e with a
> > >SONY CD-RW CRX700E. I have compiled in emulation support, scsi support,
> > >and scsi generic support. I am running redhat 7.0 with kernel 2.2.18.
> > >In my lilo.conf I tell linux to ignore my cdrom as an ide device:
> > >append="hdc=ide-scsi". I have moved the cdrom link from /dev/hdc to
> > >/dev/scd0. When I run cdrecord -scanbus I get,
> > >
> > >{root@taiga}->cdrecord -scanbus
> > >Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
> > >Linux sg driver version: 2.1.39
> > >Using libscg version 'schily-0.1'
> > >scsibus0:
> > > 0,0,0 0) 'SONY ' 'CD-RW CRX700E ' '1.4h' Removable
> > >CD-ROM
> > > 0,1,0 1) *
> > > 0,2,0 2) *
> > > 0,3,0 3) *
> > > 0,4,0 4) *
> > > 0,5,0 5) *
> > > 0,6,0 6) *
> > > 0,7,0 7) *
> > >
> > >which seems fine. However, I am unable to mount the cdrom drive. When
> > >I try I get,
> > >
> > >{root@taiga}->mount /cdrom
> > >mount: the kernel does not recognize /dev/cdrom as a block device
> > > (maybe `insmod driver'?)
> > >
> > >Am I missing a module? Or have I forgotten something. By the way, the
> > >cdrom works fine if I treat it as an ide drive.
> >
> >
------------------------------
From: Thomas Dickey <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc
Subject: Re: Term emulator with *real* keypad emulation?
Date: 18 Jan 2001 14:38:18 GMT
In comp.os.linux.misc [EMAIL PROTECTED] wrote:
> Thomas Dickey wrote:
>> all of the hits I find are for "xkb", which is not applicable.
>> perhaps you meant xkeycaps (which sets up xmodmap -- but that has problems).
> Yea, that is what I ment. What type of problems goes it have? I just
> installed it on my box and it seems to work fine.
It changes the behavior of all applications (not just xterm).
Also, commonly people are using a number for the the assignment,
which doesn't have the same meaning on all keyboards.
(xkeycaps is a good thing - I used it a while back to adapt a keyboard
for an X server that didn't recognize it - but it's not very useful for
making the numeric keypad work, since that has several states).
--
Thomas E. Dickey <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
http://dickey.his.com
ftp://dickey.his.com
------------------------------
From: "Chris" <[EMAIL PROTECTED]>
Subject: Re: Video Card problems
Date: Thu, 18 Jan 2001 14:01:08 +1100
Thank's James, But I have no idea on how
to incorporate this driver.
What is the proceedure or how would I load
this generic driver back into the system. I mean
what files do I edit and what do I put into them to
achieve this.
Thank's
Chris
"James Richard Tyrer" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> Chris wrote:
>
> > Hi, I have a 3DLabs 32MB Oxygen VX1 video card
> > the problem is I can not get the window system to come
> > up at all. This is strange because durring the installation
> > the resolution and picture quality of the monitor was perfect.
> > Tell me if I'm wrong, but if the picture is that good on installation
> > does'nt that mean that the video card was using a suitable Driver.
> >
> > How come I recieved no warnings or errors at all and when I reboot
> > there is no way I can get into KDE or any other windows.
>
> You can always use the generic SVGA driver, which is what the install
> program probably did.
>
> http://www.xfree86.org/4.0.2/Status3.html#3
>
> JRT
>
>
------------------------------
From: ekk <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc
Subject: insmod problems . . .
Date: Thu, 18 Jan 2001 09:50:58 -0500
Hello,
Something I've always been confused about - and I'm embarrased to say
so, because it seems like one of the most fundamental and important
things about linux - but I have a hard time inserting modules!! For
instance, I'm trying to install RH, and I made the necessary network
files for my eth0 card, and I'm trying to do an 'insmod tulip.o', but
all I get is and '/lib/modules/2.2.12-20/net/tulip.o: init_module:
Device or resource busy' error. I know I can recompile the kernel with
tulip turned on and the rest of the network devices turned off, but
I don't want to - as it takes too long (even on my new dual 850
machine). What is the appropriate procedure for running this module???
Thanks,
Ken
------------------------------
From: Matt McKnight III <[EMAIL PROTECTED]>
Subject: HP LaserJet 4 configuration issue
Date: Thu, 18 Jan 2001 15:15:10 GMT
I got an HP LaserJet 4 from a friend of mine, hooked it up, and setup
the print facility with 'printtool'. Everything works fine, but I can't
get it to default back to 10cpi. It stays at 18pt. proportional and it
looks like its only printing the NE quadrant of anything, even the
PostScript test page from 'printtool'. Anybody got any clues as to what
I could do with this printer to make it use the default?
Matt McKnight
Orlando, Florida
------------------------------
From: [EMAIL PROTECTED] (Michal Szymanski)
Crossposted-To: comp.os.linux.portable
Subject: recompiling kernel and PCMCIA support - how?
Date: 18 Jan 2001 15:29:20 GMT
Hi all,
I've done kernel recompiling and installing many times already but now
it is the first time I need to do it on a laptop, so I need PCMCIA support.
I didn't even know before that it is not compiled by default.
It's a RedHat 6.2 machine. Kernel sources RPM contains pcmcia sources
in /usr/src/linux tree. After "plain" kernel recompiling there are no
pcmcia modules in /lib/modules/... So I guess I should manually enter
pcmcia... directory and proceed with "make config; make; make install".
Few simple questions:
1. Is the order (kernel, pcmcia) important?
2. Will the 'make install' in pcmcia directory replace any vital
configuration files I'm using now (somewhere in /etc/, for example)?
Should I backup anything and restore afterwards?
3. Do I have to remake pcmcia every time I reconfigure kernel (even if
the changes do not regards PCMCIA devices)? It seems to be so, because
when I tried to just copy old /lib/modules/..../pcmcia to the new kernel
modules tree, 'depmod -a' resulted in a bunch of "unresolved symbols"
messages (although both kernels are 2.2.16).
any hints would be appreciated,
regards, Michal.
--
Michal Szymanski ([EMAIL PROTECTED])
Warsaw University Observatory, Warszawa, POLAND
------------------------------
From: =?ISO-8859-1?Q?Rasmus_B=F8g_Hansen?= <[EMAIL PROTECTED]>
Subject: kernel 2.4.0 and AICXXX
Date: Thu, 18 Jan 2001 16:32:54 +0100
Hi
I have heard bad romours about kernel 2.4.0 - or rather the AICXXX
support therein.
Is it correct, that it is unusuable in 2.4.0?
I would rather not waste too much time on installing it, if it is not
working with my SCSI controller.
Rasmus B�g Hansen
------------------------------
From: Dave Barnett <[EMAIL PROTECTED]>
Subject: Re: Partitioning using Disk Druid
Date: Thu, 18 Jan 2001 09:48:39 -0600
Don:
don wrote:
>
> I have 20GB Seagate hard disk.I have installed Win98 on 4GB primary dos
> partitiion.11GB is in Extended dos partition with two Logical drives of
> 7GB & 4GB.Rest of the space is left as non-dos.When i tried installing Red
> Hat 6.0 from cdrom ,using Disk Druid gives an error "Not Enough Memory"
> when i try to partition the non-dos space ,no matter how small or large
> size of partition i give for "/" mount point.
You seem to be attacking the wrong problem.
"Not enough memory" has nothing to do with disk space. It appears that
the installer wants more memory (aka RAM) than you have available. Why
this is, I couldn't tell you.
Perhaps there is a buggy installer, and you need an updated one from
www.redhat.com/errata?
Good luck.
Cheers,
Dave
--
Dave Barnett System Software Engineer x1434
Support bacteria -- they're the only culture some people have.
------------------------------
From: Alexis Dimitriadis <[EMAIL PROTECTED]>
Subject: Re: installing linux with windows 2000
Date: Thu, 18 Jan 2001 16:56:45 +0100
Scott Zhang wrote:
> It is very easy to install Linux in Windows2000: go to the CONTROL
> PANEL-->Administrative tools-->Computer management-->Disk management, delete
> the last partition, and then, of course install Linux from CD-ROM. In this
> case, you can install Linux on the rest partition that you delete just now.
Wish it were that simple! I have a Windows 2000 box with a single,
NTFS-format partition. I do not have a recent copy of Partition Magic,
which someone else recommended (the one I found is v.3.3 :-( Is there
another way to do a non-destructive repartitioning?
I've used FIPS before, but I can't tell
(a) if it handles NTFS file systems and
(b) assuming it does, how to make a bootable floppy that can see the
hard disk.
I'd appreciate any suggestions. There has to be some way to do this
that does not require buying Partition Magic, isn't there?
Many thanks,
Alexis Dimitriadis
------------------------------
From: "Meron Lavie" <[EMAIL PROTECTED]>
Crossposted-To:
alt.os.linux,alt.uu.comp.os.linux.questions,aus.computers.linux,comp.os.linux,comp.os.linux.networking,thenet.support.linux
Subject: Re: Stopping lpd Fails After Renaming Computer in redhat 7.0
Date: Wed, 17 Jan 2001 20:15:59 +0200
Thanks - that solved the problem.
"Mostyn BRAMLEY-MOORE" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> >I did a straightforward install of redhat 7.0, without specifying
membership
> >in a network. Therefore, the computer name was "localhost".
> >
> >Later, I went into linuxconf in ordre to change the host name. After
having
> >done this, every time I halt the computer, I get a message stating that
> >stopping lpd failed - localhost not found. Apparently, when I changed my
> >computer's name from localhost to something else, something got screwed
up.
> >
> >Could someone please help?
>
> do you have the line:
> 127.0.0.1 localhost
> in your /etc/hosts file?
>
> m.
> --
> ._ ._ ._ ._
> _.-._)`\_.-._)`\_.-._)`\_.-._)`\_.-._
>
------------------------------
From: [EMAIL PROTECTED]
Crossposted-To: comp.os.linux.networking,comp.os.linux.misc,uk.comp.os.linux
Subject: What is dnetc??
Date: Thu, 18 Jan 2001 16:03:28 GMT
HI all,
When I run the top command in Linux, I see a number of dnetc
processes using up a lot of cpu time:
PID USER PRI NI SIZE RSS SHARE LC STAT %CPU %MEM TIME COMMAND
693 root 20 19 708 688 504 3 R N 98.6 0.0 3849m dnetc
692 root 19 19 708 688 504 2 R N 98.4 0.0 3849m dnetc
690 root 19 19 708 688 504 0 R N 98.0 0.0 3849m dnetc
691 root 19 19 708 688 504 1 R N 98.0 0.0 3849m dnetc
You can also see them with the ps command.
root 688 0.0 0.0 2124 688 ? SN Jan15 0:03 ./dnetc
root 689 0.0 0.0 2124 688 ? SN Jan15 0:01 ./dnetc
root 690 99.8 0.0 2124 688 ? RN Jan15 3850:52 ./dnetc
root 691 99.7 0.0 2124 688 ? RN Jan15 3850:25 ./dnetc
root 692 99.8 0.0 2124 688 ? RN Jan15 3850:38 ./dnetc
root 693 99.7 0.0 2124 688 ? RN Jan15 3850:24 ./dnetc
It's actually a directory, but I can't look at it:
/usr/local/lib/dnetc
ls -l /usr/local/lib
total 4
drwx------ 3 root root 4096 Dec 1 15:03 dnetc
I've been trying to find out what this is, but I can't find anything
in apropos yet. What is dnetc all about? Which man pages refer
to it?
Thanks
Sent via Deja.com
http://www.deja.com/
------------------------------
From: "duke n maria" <[EMAIL PROTECTED]>
Subject: 2.4 kernel 2.4 ppp cannot connect
Date: Wed, 17 Jan 2001 10:22:18 -0600
i upgraded to 2.4kernel and ppp
i can only connect the interent while in root my users cannot
dialup goes through process thenb ppp daemon dies unexpectadly
error code 2
any help???????
thanks in advance for any advice
------------------------------
From: =?ISO-8859-1?Q?Rasmus_B=F8g_Hansen?= <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.networking,comp.os.linux.misc,uk.comp.os.linux
Subject: Re: What is dnetc??
Date: Thu, 18 Jan 2001 17:29:30 +0100
On Thu, 18 Jan 2001 [EMAIL PROTECTED] wrote:
> PID USER PRI NI SIZE RSS SHARE LC STAT %CPU %MEM TIME COMMAND
> 693 root 20 19 708 688 504 3 R N 98.6 0.0 3849m dnetc
> 692 root 19 19 708 688 504 2 R N 98.4 0.0 3849m dnetc
> 690 root 19 19 708 688 504 0 R N 98.0 0.0 3849m dnetc
> 691 root 19 19 708 688 504 1 R N 98.0 0.0 3849m dnetc
Try 'apropos dnetc' or 'whatis dnetc'.
> It's actually a directory, but I can't look at it:
>
> /usr/local/lib/dnetc
>
> ls -l /usr/local/lib
> total 4
> drwx------ 3 root root 4096 Dec 1 15:03 dnetc
>
Eh, you have to be root to see it. So su and look at the contents.
> I've been trying to find out what this is, but I can't find anything
> in apropos yet. What is dnetc all about? Which man pages refer
> to it?
Ah, I suppose that obsoletes my first answer. I'm afraid that I do not
know. Try to do a 'locate dnetd' - perhaps there is something readable
somewhere...
Rasmus B�g Hansen
------------------------------
From: [EMAIL PROTECTED]
Crossposted-To: comp.os.linux.networking,comp.os.linux.misc,uk.comp.os.linux
Subject: Re: What is dnetc??
Date: Thu, 18 Jan 2001 16:15:19 GMT
Hopefully, this will be more readable:
When I run the top command, I see a number of dnetc processes using
up a lot of memory:
PID USER PRI NI SIZE RSS SHARE LC STAT %CPU %MEM TIME COMMAND
693 root 20 19 708 688 504 3 R N 98.6 0.0 3849m dnetc
692 root 19 19 708 688 504 2 R N 98.4 0.0 3849m dnetc
690 root 19 19 708 688 504 0 R N 98.0 0.0 3849m dnetc
691 root 19 19 708 688 504 1 R N 98.0 0.0 3849m dnetc
You can also see them with the ps command.
root 688 0.0 0.0 2124 688 ? SN Jan15 0:03 ./dnetc
root 689 0.0 0.0 2124 688 ? SN Jan15 0:01 ./dnetc
root 690 99.8 0.0 2124 688 ? RN Jan15 3850:52 ./dnetc
root 691 99.7 0.0 2124 688 ? RN Jan15 3850:25 ./dnetc
root 692 99.8 0.0 2124 688 ? RN Jan15 3850:38 ./dnetc
root 693 99.7 0.0 2124 688 ? RN Jan15 3850:24 ./dnetc
> It's actually a directory, but I can't look at it:
>
> /usr/local/lib/dnetc
>
> ls -l /usr/local/lib
> total 4
> drwx------ 3 root root 4096 Dec 1 15:03 dnetc
>
> I've been trying to find out what this is, but I can't find anything
> in apropos yet. What is dnetc all about? Which man pages refer
> to it?
>
> Thanks
>
> Sent via Deja.com
> http://www.deja.com/
>
Sent via Deja.com
http://www.deja.com/
------------------------------
From: [EMAIL PROTECTED] (Marble Head)
Subject: Streaming video help
Date: 18 Jan 2001 16:29:29 GMT
I have an AXP box running RH 6.2.
I want to set it up as a streaming video server.
I'm having a very hard time finding *any* linux streaming video server, let
alone one compiled for AXP.
Can anybody make a suggestion that will help with my search?
TIA.
------------------------------
From: "Werner Fangmeier" <[EMAIL PROTECTED]>
Subject: Re: Help needed with installing new 2.4 kernel
Date: Thu, 18 Jan 2001 17:37:00 +0100
AFAIK, There's a Kernel-HOWTO as well as the Bootdisk-HOWTO describing the
nessecary steps to install a new kernel. Here are the main topics:
- Go to /usr/src and see whether /usr/src/linux is a directory or a
symbolic link to e.g. /usr/src/linux-2.2.14
If it's "real" directory, rename it to linux-2.2.14 (i.e., use the
kernel version as a suffix), if it's a link,
check it's target and note it somewhere (if you need to switch kernel
version back). Then, remove the
symbolic link: # rm -f /usr/src/linux
- Unpack the kernel source tree:
bzip2 -cd linux-2.4.0.tar.bz2 | tar -C /usr/src -xvf -
- Rename the "linux" directory: # mv /usr/src/linux /usr/src/linux-2.4.0
- Establish the symbolic link: # ln -s /usr/src/linux-2.4.0
/usr/src/linux
- Change to the new linux directory: # cd /usr/src/linux
- Configure & compile the kernel: make xconfig bzImage modules
modules_install
- Copy the new kernel: # cp /usr/src/linux/arch/i386/boot/bzImage
/boot/vmlinuz-2.4.0
- Edit /etc/lilo.conf and create a new entry for the newly compiled
kernel image, /boot/vmlinuz-2.4.0.
- Run lilo: # /sbin/lilo
- Reboot machine to test new kernel
HTH, Werner
<[EMAIL PROTECTED]> schrieb im Newsbeitrag
news:946s15$2pp$[EMAIL PROTECTED]...
> Hi,
>
> I'm always facing problems when upgrading kernel on my linux box right
> now I'm upgrading from 2.2.14 (SuSE6.4) to the new 2.4.0 kernel. Till
> now I haven't found any document describing the exact procedure one
> must follow and which problems one can face doing this.
>
> Most of the time I get stuck with module loading problems for ex.
> depmod looking into the wrong directories on creating the modules.dep
> file. Modules that cannot be found during startup etc. etc.....
>
> My questions are:
>
> Is there a HOWTO describing the exact procedure on how one can upgrade
> and correctly install a new kernel ?
>
> Is there also a reference list where I can find which char-major-xx
> belongs to which device ?
>
> How is the modules.conf file created ?
>
> Anyone some info on this ?
>
> Tia,
>
> Eric
>
>
> Sent via Deja.com
> http://www.deja.com/
------------------------------
Crossposted-To: comp.os.linux.networking,comp.os.linux.misc,uk.comp.os.linux
Subject: Re: What is dnetc??
From: Thomas Rasmussen <[EMAIL PROTECTED]>
Date: Thu, 18 Jan 2001 16:39:10 GMT
>>>>> "newbie22" == newbie22 <[EMAIL PROTECTED]> writes:
newbie22> Hopefully, this will be more readable: When I run the top
newbie22> command, I see a number of dnetc processes using up a lot
newbie22> of memory:
huh? it uses about 700 bytes for memory...
I'm not entirely sure about your computer, but I'm running a process
called dnetc that is the client for distributed.net cracking 64bit RC5
keys... have a look at: http://www.distributed.net
If it's your own computer and you haven't started it, then I really
don't know what it is... but since it is niced to 19, it shouldn't
affect any other processes.
You should only be running one of these clients per processor
installed in the computer.
Hope it has clarified something.
/Thomas
--
"To alcohol! The cause of - and solution to - all of life's problems!"
-- Homer Simpson
------------------------------
From: Bill Hudson <[EMAIL PROTECTED]>
Subject: Re: Help! Beginner c++ compiling problem in RH7.0
Date: 18 Jan 2001 16:39:20 GMT
Innes MacKenzie wrote:
>
> In RH7.0,
>
> When I compile this program:
>
> #include <deque>
> int main()
> {
> std::deque<int> v;
> return 0;
> }
>
RedHat 7.0 is a poor choice for this, because they shipped it with
broken libraries and compilers. In fact, the compiler is so broken they
give you a kernel-specific compiler 'kgcc' just for that.
I would drop back to 6.2.
--
Bill Hudson
------------------------------
From: "Peter van Kampen" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.networking,comp.os.linux.misc,uk.comp.os.linux
Subject: Re: What is dnetc??
Date: Thu, 18 Jan 2001 17:52:34 +0100
<[EMAIL PROTECTED]> wrote in message news:947448$ao7$[EMAIL PROTECTED]...
> HI all,
>
> When I run the top command in Linux, I see a number of dnetc
> processes using up a lot of cpu time:
Your computer has been assimilated (resistance is futile...)
See http://distributed.net/
}:O Moooooooooooooooooooooooh (DPC no 1. in RC5 as of Today)
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: What is dnetc??
Crossposted-To: comp.os.linux.networking,comp.os.linux.misc,uk.comp.os.linux
Date: Thu, 18 Jan 2001 16:47:41 GMT
a simple web search ..
it could be the distributed.net client ..
http://www.distributed.net
if your'e root and can't look at the directory your drive needs to be fsck'd
to say the least ...
In comp.os.linux.networking [EMAIL PROTECTED] wrote:
> HI all,
> When I run the top command in Linux, I see a number of dnetc
> processes using up a lot of cpu time:
> PID USER PRI NI SIZE RSS SHARE LC STAT %CPU %MEM TIME COMMAND
> 693 root 20 19 708 688 504 3 R N 98.6 0.0 3849m dnetc
> 692 root 19 19 708 688 504 2 R N 98.4 0.0 3849m dnetc
> 690 root 19 19 708 688 504 0 R N 98.0 0.0 3849m dnetc
> 691 root 19 19 708 688 504 1 R N 98.0 0.0 3849m dnetc
> You can also see them with the ps command.
> root 688 0.0 0.0 2124 688 ? SN Jan15 0:03 ./dnetc
> root 689 0.0 0.0 2124 688 ? SN Jan15 0:01 ./dnetc
> root 690 99.8 0.0 2124 688 ? RN Jan15 3850:52 ./dnetc
> root 691 99.7 0.0 2124 688 ? RN Jan15 3850:25 ./dnetc
> root 692 99.8 0.0 2124 688 ? RN Jan15 3850:38 ./dnetc
> root 693 99.7 0.0 2124 688 ? RN Jan15 3850:24 ./dnetc
> It's actually a directory, but I can't look at it:
> /usr/local/lib/dnetc
> ls -l /usr/local/lib
> total 4
> drwx------ 3 root root 4096 Dec 1 15:03 dnetc
> I've been trying to find out what this is, but I can't find anything
> in apropos yet. What is dnetc all about? Which man pages refer
> to it?
> Thanks
> Sent via Deja.com
> http://www.deja.com/
--
#!/usr/bin/perl
$a="\<b isfg\=\"nbjmup";
$b="\:\/\/udq\@cmvfnppo";
$c="\.nzjq\.psh\"\>tfoe\<\/b\>";
$d="$a"."$b"."$c";
$d =~ y/b-z/a-z/;
print "$d\n";
------------------------------
From: "Werner Fangmeier" <[EMAIL PROTECTED]>
Subject: Re: Recreate kernel .config-file for existing redhat7-kernel
Date: Thu, 18 Jan 2001 17:46:09 +0100
Recreate from where? You'll either have to re-create it from scratch, or
(better) use your last successful .config from RH6 as a template for a 'make
oldconfig' call, or to load it from the 'make xconfig' dialog.
If the old .config file was lost, there's no chance to recreate it and
you'll have to go thru the complete 'make xconfig' - stuff.
HTH, Werner
"J�rgen Simonsen" <[EMAIL PROTECTED]> schrieb im Newsbeitrag
news:[EMAIL PROTECTED]...
> Hello all,
>
> I have no .config-file for my actual redhat7-kernel.
> Is it possible to recreate the config-file for my
> kernel?
>
> Thanks for help
> J�rgen
------------------------------
From: "AndyW" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.networking,comp.os.linux.misc,uk.comp.os.linux
Subject: Re: What is dnetc??
Date: Thu, 18 Jan 2001 16:51:09 -0000
<[EMAIL PROTECTED]> wrote in message news:947448$ao7$[EMAIL PROTECTED]...
> HI all,
>
> When I run the top command in Linux, I see a number of dnetc
> processes using up a lot of cpu time:
>
> PID USER PRI NI SIZE RSS SHARE LC STAT %CPU %MEM TIME COMMAND
> 693 root 20 19 708 688 504 3 R N 98.6 0.0 3849m dnetc
> 692 root 19 19 708 688 504 2 R N 98.4 0.0 3849m dnetc
> 690 root 19 19 708 688 504 0 R N 98.0 0.0 3849m dnetc
> 691 root 19 19 708 688 504 1 R N 98.0 0.0 3849m dnetc
>
>
>
> You can also see them with the ps command.
>
> root 688 0.0 0.0 2124 688 ? SN Jan15 0:03 ./dnetc
> root 689 0.0 0.0 2124 688 ? SN Jan15 0:01 ./dnetc
> root 690 99.8 0.0 2124 688 ? RN Jan15 3850:52 ./dnetc
> root 691 99.7 0.0 2124 688 ? RN Jan15 3850:25 ./dnetc
> root 692 99.8 0.0 2124 688 ? RN Jan15 3850:38 ./dnetc
> root 693 99.7 0.0 2124 688 ? RN Jan15 3850:24 ./dnetc
>
>
> It's actually a directory, but I can't look at it:
>
> /usr/local/lib/dnetc
>
> ls -l /usr/local/lib
> total 4
> drwx------ 3 root root 4096 Dec 1 15:03 dnetc
>
>
> I've been trying to find out what this is, but I can't find anything
> in apropos yet. What is dnetc all about? Which man pages refer
> to it?
>
>
> Thanks
>
>
dnetc is the distributed.net client. This is a distributed code-cracking
effort across the Internet. See www.distributed.net for more details about
what it does.
It's completely harmless, as it only uses idle CPU time to crack code blocks
downloaded from a server, but if you didn't know it was there, someone else
must have root access to your box to have put it there. The more code blocks
you process, the more likely you are to win the prize-money - maybe somebody
has cracked you just to install dnetc?
Andy
------------------------------
From: Julien Verchere <[EMAIL PROTECTED]>
Subject: kdevelop compilation under Mandrake7.2: qt2 problem.
Date: Thu, 18 Jan 2001 17:52:54 +0100
Hello,
I have a Mandrake 7.2 installed. I try to install kdevelop. I first used
the Mandrake RPM but the software systematicaly crashe when I launch it.
So I try to recompile kdevelop. However, when I want to 'configure' it, I
obtain the following error:
"checking for Qt... configure: error: Qt (>= Qt 2.2.2) (libraries) not
found. Please check your installation!"
It is not the first time. I ever had this error trying to compile some
programs which use Qt. Is there a link that Mandrake has not installed. I
use kde2 and I am sure that qt2.2 is installed.
Thanks by advance,
Julien
------------------------------
From: "ne..." <[EMAIL PROTECTED]>
Subject: Re: where to install kernel sources
Date: Thu, 18 Jan 2001 17:04:43 GMT
On Jan 18, 2001 at 14:28, Eggert Ehmke eloquently wrote:
>On Thu, 18 Jan 2001 13:01:59 GMT, "ne..." <[EMAIL PROTECTED]> wrote:
>
>>>>>Question: May I install the sources in /usr/src/linux or not?
>>>>No, you may not.
>>>
>>>This seems to be a new advice in the 2.4.0 kernel. Do you know the reason ?
>>Short ans: Cause Linus said so.
>>Long ans: When you installed your system, the packages were
>>compiled with the stuff in /usr/src/linux. By changing this,
>>the chances of this messing up stuff increases exponentially.
>>There are imcompatibilities between headers in the two versions.
>
>Hmm, but should this not also be true with 2.2.x kernels ? I upgraded all my
>2.2.x kernels up to 2.2.18 using the strategy that now shall be wrong. I
>never had a problem. Also, checking the 2.2.18 README, this hint was not
>there. So what has changed in 2.4 that it is dangerous now ?
I used to do the same thing till I saw something by Linus at
Kernel Traffic #80. The article is about symlinks in the kernel.
[...]
--
Registered Linux User # 125653 (http://counter.li.org)
The control of the production of wealth is the control of human life itself.
-- Hilaire Belloc
11:09am up 7 days, 14:07, 9 users, load average: 0.00, 0.02, 0.00
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list by posting to comp.os.linux.setup.
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Setup Digest
******************************
