> When I boot 2.1.131, the scsi info gets to the line "scsi : 1 host." like
> above, then after 15 or 20 seconds it comes up with a message about a
> timeout, then resets the BT958 and times out again...continues to loop
> like this.
>
> This almost certainly indicates that interrupts are not getting through to the
> driver, which is probably due to issues between the hardware or motherboard
> BIOS and the I/O APIC code in the kernel.
In such cases install 2.1.131ac13 and specify "noapic" on the boot command
line. If your machine is then happy suspect the APIC tables in the bios.
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
