If etc is make modules, make modules_install, cp vmlinuz System.map /boot,
the everything is OK. Now don't forget to edit lilo.conf to point to your
new image and rerun lilo.
You can also try "uname -a" or "cat /proc/version" to see which kernel you
are
really running.
Rui Sousa
On Mon, 1 Nov 1999, Stuart Hardy wrote:
> Hello,
>
> I have four Compaq Proliant 5500 quad PPro boxes that I am using to build a Beowulf
>cluster. They each have 4 512K PPro 200s installed.
>
> The cluster part is working fine, all machines see each other etc. When I do a cat
>/proc/cpuinfo, the results only show one processor, so I am assuming the problem is
>with the SMP.
>
> I ran make xconfig to turn SMP on and set the CPU type to 686. I then did make dep ,
>make clean, make bzImage etc. But, I still show only processor.
>
> Any help would be appreciated.
>
> All the best,
>
> Stuart.
>
>
>
> -
> Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
> To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
>
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
