I made a mistake..its an Xtended Xpress15 INTEL motherboard and American Megatrends bios. Just thought I would set it straight. Thanks > -----Original Message----- > From: Kelly Sauke > Sent: Wednesday, December 08, 1999 3:11 PM > To: '[EMAIL PROTECTED]' > Subject: SMP and eata > > > I've been trying to boot a quad pentium 100 with a Xtended Xpress15 > American Megatrends mother board on Redhat 6.1. The problem I've run into > is if I compile with smp support, on boot it fails out trying to > initialize the SCSI disk, it gets into some sort of infinite loop saying > it timed out opening mbox 0 with pid 0. Sorry I don't have the exact > error I haven't been able to capture it off the screen since it never > boots fully. What I think is wierd is if the only change I make is to > unclick the smp box in make xconfig and recompile...it will boot fine. > The modules that it loads for the scsi device is eata.o > > Has anyone else had this problem? Any ideas of what might cause this? > Thanks, > > Kelly Sauke > > > > - Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/ To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
