linux-spi  

Messages by Date

• 2015/04/06 Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate Mark Brown
• 2015/04/06 Re: [PATCH v6] spi: Add SPI driver for Mikrotik RB4xx series boards Mark Brown
• 2015/04/06 Re: [patch] spi: signedness bug in qspi_trigger_transfer_out_int() Mark Brown
• 2015/04/06 Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips Rafał Miłecki
• 2015/04/06 Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips Rafał Miłecki
• 2015/04/06 Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips Rafał Miłecki
• 2015/04/06 Re: [PATCH 2/4] spi: bcm53xx: Refactor to make driver nonspecific to 53xx SoCs Rafał Miłecki
• 2015/04/06 Re: [PATCH v6] spi: Add SPI driver for Mikrotik RB4xx series boards Andy Shevchenko
• 2015/04/06 Re: [PATCH 4/4] spi: bcm-mspi: Add support to set serial baud clock rate Mark Brown
• 2015/04/05 [PATCH v6] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
• 2015/04/04 Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Stephen Warren
• 2015/04/04 Re: [PATCH 1/4] ARM: dts: Add binding for Broadcom MSPI driver. Florian Fainelli
• 2015/04/04 Re: [PATCH 4/4] spi: bcm-mspi: Add support to set serial baud clock rate Florian Fainelli
• 2015/04/03 Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate Aaron Brice
• 2015/04/03 Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate Andy Shevchenko
• 2015/04/03 [PATCH v3 3/3] spi: fsl-dspi: Add ~50ns delay between cs and sck Aaron Brice
• 2015/04/03 [PATCH v3 2/3] devicetree: spi: fsl-dspi: Add cs-sck delays Aaron Brice
• 2015/04/03 [PATCH v3 0/3] spi: fsl-dspi (vf610) clock fixes Aaron Brice
• 2015/04/03 [PATCH v3 1/3] spi: fsl-dspi: Fix clock rate scale values Aaron Brice
• 2015/04/03 Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips Florian Fainelli
• 2015/04/03 Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate Aaron Brice
• 2015/04/03 Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips Andy Shevchenko
• 2015/04/03 Re: [PATCH 2/4] spi: bcm53xx: Refactor to make driver nonspecific to 53xx SoCs Andy Shevchenko
• 2015/04/03 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
• 2015/04/03 Re: [patch] spi: signedness bug in qspi_trigger_transfer_out_int() Cao Minh Hiep
• 2015/04/03 [patch] spi: signedness bug in qspi_trigger_transfer_out_int() Dan Carpenter
• 2015/04/03 Re: Using gpio_keys with regmapped gpio? Geert Uytterhoeven
• 2015/04/02 [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips Jonathan Richardson
• 2015/04/02 [PATCH 2/4] spi: bcm53xx: Refactor to make driver nonspecific to 53xx SoCs Jonathan Richardson
• 2015/04/02 [PATCH 0/4] Add MSPI support for Cygnus Jonathan Richardson
• 2015/04/02 [PATCH 1/4] ARM: dts: Add binding for Broadcom MSPI driver. Jonathan Richardson
• 2015/04/02 [PATCH 4/4] spi: bcm-mspi: Add support to set serial baud clock rate Jonathan Richardson
• 2015/04/02 [PATCH v1 1/2] spi: fsl-dspi: increase precision of baud rate approximation Andy Shevchenko
• 2015/04/02 [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate Andy Shevchenko
• 2015/04/02 [PATCH v1 2/2][RFC] spi: fsl-dspi: use double baud rate in approximation Andy Shevchenko
• 2015/04/01 Re: [PATCH] spi: imx: read back the RX/TX watermark levels earlier Mark Brown
• 2015/04/01 Re: [PATCH] spi: imx: read back the RX/TX watermark levels earlier Mark Brown
• 2015/04/01 Re: [PATCH] spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers() Mark Brown
• 2015/04/01 [PATCH] spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers() Chen Gang
• 2015/04/01 Re: Using gpio_keys with regmapped gpio? Dmitry Torokhov
• 2015/04/01 Re: Using gpio_keys with regmapped gpio? Dmitry Torokhov
• 2015/04/01 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Stephen Warren
• 2015/04/01 Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us Stephen Warren
• 2015/04/01 [PATCH] spi: imx: read back the RX/TX watermark levels earlier Lucas Stach
• 2015/03/31 Re: Using gpio_keys with regmapped gpio? Thor Thayer
• 2015/03/31 [PATCH v5] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
• 2015/03/31 Re: [PATCH v2] spi: bitbang: only toggle bitchanges Mark Brown
• 2015/03/31 Re: Using gpio_keys with regmapped gpio? Dmitry Torokhov
• 2015/03/31 Re: [PATCH v2] spi: bitbang: only toggle bitchanges Michael Grzeschik
• 2015/03/31 Re: Using gpio_keys with regmapped gpio? Mark Brown
• 2015/03/31 Using gpio_keys with regmapped gpio? Thor Thayer
• 2015/03/31 Re: [PATCH v2 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck Aaron Brice
• 2015/03/31 Re: [PATCH v2] spi: bitbang: only toggle bitchanges Jonas Gorski
• 2015/03/31 Re: [PATCH v4] spi: Add SPI driver for Mikrotik RB4xx series boards Jonas Gorski
• 2015/03/31 Re: [PATCH v4] spi: Add SPI driver for Mikrotik RB4xx series boards Andy Shevchenko
• 2015/03/31 [PATCH v4] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
• 2015/03/31 Re: [PATCH v2] spi: bitbang: only toggle bitchanges Mark Brown
• 2015/03/31 Re: [PATCH v3] spi: Add SPI driver for Mikrotik RB4xx series boards Andy Shevchenko
• 2015/03/31 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
• 2015/03/31 [PATCH v2] spi: bitbang: only toggle bitchanges Michael Grzeschik
• 2015/03/31 Re: [PATCH v2 0/1] spi: Add driver for Routerboard RB4xx boards Ralf Baechle
• 2015/03/31 Re: [PATCH] spi: bitbang: only toggle bitchanges Mark Brown
• 2015/03/31 [PATCH v3] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
• 2015/03/31 Re: [PATCH v2 1/1] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Mark Brown
• 2015/03/31 Re: [PATCH v2 1/1] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Dan Carpenter
• 2015/03/31 [PATCH] spi: bitbang: only toggle bitchanges Michael Grzeschik
• 2015/03/31 [PATCH v2 1/1] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Andy Shevchenko
• 2015/03/31 Re: [PATCH] spi: xilinx: Use standard num-cs binding Mark Brown
• 2015/03/31 Re: [PATCH] spi: xilinx: Use standard num-cs binding Michal Simek
• 2015/03/31 Re: [PATCH] spi: xilinx: Use standard num-cs binding Mark Brown
• 2015/03/31 Re: [PATCH v2 1/2] spi: fsl-dspi: Fix clock rate scale values Mark Brown
• 2015/03/31 Re: [patch] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Mark Brown
• 2015/03/31 Re: [PATCH v2 0/1] spi: Add driver for Routerboard RB4xx boards Mark Brown
• 2015/03/31 Re: [PATCH] spi: xilinx: Use standard num-cs binding Michal Simek
• 2015/03/31 spi-altera in mainline Pelle Nilsson
• 2015/03/30 Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us Martin Sperl
• 2015/03/30 Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any Martin Sperl
• 2015/03/30 Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
• 2015/03/30 Re: [PATCH] spi: xilinx: Use standard num-cs binding Mark Brown
• 2015/03/30 Re: [PATCH v3 1/1] spi: Using Trigger number to transmit/receive data Cao Minh Hiep
• 2015/03/30 Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Mark Brown
• 2015/03/30 Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any Stephen Warren
• 2015/03/30 Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us Stephen Warren
• 2015/03/30 Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used Stephen Warren
• 2015/03/30 Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used Stephen Warren
• 2015/03/30 Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Stephen Warren
• 2015/03/30 Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is Stephen Warren
• 2015/03/30 Re: [PATCH v2 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck Stefan Agner
• 2015/03/30 Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any Martin Sperl
• 2015/03/30 Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used Martin Sperl
• 2015/03/30 Re: [PATCH v2 1/1] spi: Add SPI driver for Mikrotik RB4xx series boards Andy Shevchenko
• 2015/03/30 Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used Mark Brown
• 2015/03/30 Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any Mark Brown
• 2015/03/30 Re: [PATCH v3 1/1] spi: Using Trigger number to transmit/receive data Mark Brown
• 2015/03/30 Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us Mark Brown
• 2015/03/30 [PATCH v2 1/1] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
• 2015/03/30 [PATCH v2 0/1] spi: Add driver for Routerboard RB4xx boards Bert Vermeulen
• 2015/03/30 [PATCH v2 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck Aaron Brice
• 2015/03/30 [PATCH v2 0/2] spi: fsl-dspi (vf610) clock fixes Aaron Brice
• 2015/03/30 [PATCH v2 1/2] spi: fsl-dspi: Fix clock rate scale values Aaron Brice
• 2015/03/30 Re: [patch] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Andy Shevchenko
• 2015/03/30 [patch] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Dan Carpenter
• 2015/03/29 Re: [PATCH] spi: xilinx: Use standard num-cs binding Michal Simek
• 2015/03/29 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
• 2015/03/29 Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is Mark Brown
• 2015/03/29 Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is Martin Sperl
• 2015/03/29 Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Mark Brown
• 2015/03/29 Re: [PATCH 2/6] spi: bcm2835: fix code formatting issue Mark Brown
• 2015/03/29 Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is Mark Brown
• 2015/03/29 [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
• 2015/03/29 [PATCH 2/6] spi: bcm2835: fix code formatting issue Martin Sperl
• 2015/03/29 [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used Martin Sperl
• 2015/03/29 [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any Martin Sperl
• 2015/03/29 [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us Martin Sperl
• 2015/03/29 [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is Martin Sperl
• 2015/03/29 [PATCH 0/6] spi: bcm2835: collection of driver-optimizations Martin Sperl
• 2015/03/29 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
• 2015/03/28 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Stephen Warren
• 2015/03/28 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
• 2015/03/28 spi: bcm2835: strange observation with cs_gpios low after reboot Martin Sperl
• 2015/03/27 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Stephen Warren
• 2015/03/27 Re: [PATCH 1/2] spi: fsl-dspi: Fix clock rate scale values Mark Brown
• 2015/03/27 [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev" Mark Brown
• 2015/03/27 [PATCH 0/2] spi: fsl-dspi (vf610) clock fixes Aaron Brice
• 2015/03/27 [PATCH 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck Aaron Brice
• 2015/03/27 [PATCH 1/2] spi: fsl-dspi: Fix clock rate scale values Aaron Brice
• 2015/03/27 Re: [PATCH] spi: xilinx: Use standard num-cs binding Mark Brown
• 2015/03/27 Re: [PATCH] spi: xilinx: Use standard num-cs binding Michal Simek
• 2015/03/26 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Mark Brown
• 2015/03/26 Re: [PATCH 1/2] spi/rockchip: Round up clock rate divisor to err on the safe side Mark Brown
• 2015/03/26 Re: [PATCH 2/2] spi/rockchip: Add device tree property to configure Rx Sample Delay Doug Anderson
• 2015/03/26 Re: [PATCH 1/2] spi/rockchip: Round up clock rate divisor to err on the safe side Doug Anderson
• 2015/03/26 [PATCH 1/2] spi/rockchip: Round up clock rate divisor to err on the safe side Julius Werner
• 2015/03/26 [PATCH 2/2] spi/rockchip: Add device tree property to configure Rx Sample Delay Julius Werner
• 2015/03/26 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
• 2015/03/26 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Stephen Warren
• 2015/03/26 Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Mark Brown
• 2015/03/26 Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Mark Brown
• 2015/03/26 Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Mark Brown
• 2015/03/26 Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Nicolas Ferre
• 2015/03/26 Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Mark Brown
• 2015/03/26 Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Hans-Christian Egtvedt
• 2015/03/26 [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Ben Dooks
• 2015/03/26 [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
• 2015/03/25 Re: [PATCH 2/2] spi: Add driver for the CPLD chip on Mikrotik RB4xx boards Andy Shevchenko
• 2015/03/25 Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards Andy Shevchenko
• 2015/03/25 Re: [RESEND PATCH] spi: of: do explicitly request modules for of-registered devices Mark Brown
• 2015/03/25 Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Mark Brown
• 2015/03/25 [RESEND PATCH] spi: of: do explicitly request modules for of-registered devices Dmitry Torokhov
• 2015/03/25 Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Martin Sperl
• 2015/03/25 Re: [PATCH 1/1] spi: dw: fix crash on setup stage Mark Brown
• 2015/03/25 Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Mark Brown
• 2015/03/25 [PATCH 1/1] spi: dw: fix crash on setup stage Andy Shevchenko
• 2015/03/25 Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Martin Sperl
• 2015/03/25 Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Mark Brown
• 2015/03/25 Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Martin Sperl
• 2015/03/25 Re: [PATCH v2 1/1] spi: pxa2xx: replace ugly table by approximation Mark Brown
• 2015/03/25 Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation Andy Shevchenko
• 2015/03/25 Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation Mark Brown
• 2015/03/25 Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Mark Brown
• 2015/03/25 [PATCH v2 1/1] spi: pxa2xx: replace ugly table by approximation Andy Shevchenko
• 2015/03/25 Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation Andy Shevchenko
• 2015/03/25 Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Martin Sperl
• 2015/03/24 [GIT PULL] spi fixes for v4.0 Mark Brown
• 2015/03/24 Re: [PATCH v1 1/2] spi: pxa2xx: shift clk_div in one place Mark Brown
• 2015/03/24 Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation Mark Brown
• 2015/03/24 Re: [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case Mark Brown
• 2015/03/24 Re: [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case Andy Shevchenko
• 2015/03/24 Re: [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case Mark Brown
• 2015/03/24 [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation Andy Shevchenko
• 2015/03/24 [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case Andy Shevchenko
• 2015/03/24 [PATCH v1 1/2] spi: pxa2xx: shift clk_div in one place Andy Shevchenko
• 2015/03/23 Re: [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message Mark Brown
• 2015/03/23 Re: [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message Ian Abbott
• 2015/03/23 Re: [PATCH] SPI: BCM2835: enable support of 3-wire mode Mark Brown
• 2015/03/23 Re: [PATCH] SPI: BCM2835: clock divider can be a multiple of 2 Mark Brown
• 2015/03/23 Re: [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message Mark Brown
• 2015/03/23 Re: [PATCH] spi: bcm2835: fill/drain SPI-fifo as much as possible during interrupt Mark Brown
• 2015/03/23 [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message Ian Abbott
• 2015/03/23 Re: [PATCH 1/2] spi: pxa2xx: Remove needless includes Mark Brown
• 2015/03/23 Re: spi: spidev: only use up TX/RX bounce buffer space when needed Ian Abbott
• 2015/03/23 [PATCH] spi: bcm2835: fill/drain SPI-fifo as much as possible during interrupt Martin Sperl
• 2015/03/23 re: spi: spidev: only use up TX/RX bounce buffer space when needed Dan Carpenter
• 2015/03/23 [PATCH 2/2] spi: omap-uwire: Remove needless include asm/irq.h Jarkko Nikula
• 2015/03/23 [PATCH 1/2] spi: pxa2xx: Remove needless includes Jarkko Nikula
• 2015/03/22 Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards Mark Brown
• 2015/03/22 Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi Mark Brown
• 2015/03/22 Re: [PATCH 09/13] spi: atmel: use endian agnostic IO Mark Brown
• 2015/03/22 Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
• 2015/03/20 Re: [PATCH V2] SPI: BCM2835: fix all checkpath --strict messages Mark Brown
• 2015/03/20 Re: [PATCH v2] spi: Ensure that CS line is in non-active state after spi_setup() Mark Brown
• 2015/03/20 Re: [PATCH v2] spi: Ensure that CS line is in non-active state after spi_setup() Ivan T. Ivanov
• 2015/03/20 Re: [PATCH] SPI: BCM2835: clock divider can be a multiple of 2 Noralf Trønnes
• 2015/03/20 [PATCH V2] SPI: BCM2835: fix all checkpath --strict messages Martin Sperl
• 2015/03/20 Re: [PATCH] SPI: BCM2835: fix all checkpath --strict messages Mark Brown
• 2015/03/20 Re: [PATCH] SPI: BCM2835: fix all checkpath --strict messages Mark Brown
• 2015/03/20 Re: [PATCH 2/2] spi: Add driver for the CPLD chip on Mikrotik RB4xx boards Mark Brown
• 2015/03/20 Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi Peter Ujfalusi
• 2015/03/20 Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi Peter Ujfalusi
• 2015/03/20 Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards Mark Brown

• Later messages