Until now, the spi-orion driver was limited to supporting only one internal chip select (i.e not the GPIO ones, but the ones directly handled by the SPI controller). However, recent Marvell platforms potentially have more than one chip select, so this commit adds support for a new 'ncs' DT property, which indicates how many chip selects are available on this platform.
Signed-off-by: Thomas Petazzoni <[email protected]> --- We could certainly discuss: * Whether 'ncs' should be the number of *connected* chip selects, or the number of *usable* chip selects. * If it's the number of *usable* chip selects, then maybe it shouldn't be a DT property, but rather something that the driver "knows" thanks to the compatible string (which then, would be different from one SoC to the other, since Armada XP and Armada 375 for example don't have the same number of chip selects). Suggestions welcome. Signed-off-by: Thomas Petazzoni <[email protected]> --- Documentation/devicetree/bindings/spi/spi-orion.txt | 3 +++ drivers/spi/spi-orion.c | 16 ++++++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt index a3ff50f..0388c48 100644 --- a/Documentation/devicetree/bindings/spi/spi-orion.txt +++ b/Documentation/devicetree/bindings/spi/spi-orion.txt @@ -6,6 +6,8 @@ Required properties: - cell-index : Which of multiple SPI controllers is this. Optional properties: - interrupts : Is currently not used. +- ncs : Number of chip selects used on the platform. Defaults to 1 when + unspecified. Example: spi@10600 { @@ -15,5 +17,6 @@ Example: cell-index = <0>; reg = <0x10600 0x28>; interrupts = <23>; + ncs = <2>; status = "disabled"; }; diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index c206a4a..8145855 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -23,7 +23,6 @@ #define DRIVER_NAME "orion_spi" -#define ORION_NUM_CHIPSELECTS 1 /* only one slave is supported*/ #define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */ #define ORION_SPI_IF_CTRL_REG 0x00 @@ -38,6 +37,8 @@ #define ORION_SPI_CLK_PRESCALE_MASK 0x1F #define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \ ORION_SPI_MODE_CPHA) +#define ORION_SPI_CS(cs) ((cs) << 2) +#define ORION_SPI_CS_MASK GENMASK(4, 2) struct orion_spi { struct spi_master *master; @@ -150,6 +151,11 @@ orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if (rc) return rc; + orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, + ORION_SPI_CS_MASK); + orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, + ORION_SPI_CS(spi->chip_select)); + if (bits_per_word == 16) orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, ORION_SPI_IF_8_16_BIT_MODE); @@ -346,6 +352,7 @@ static int orion_spi_probe(struct platform_device *pdev) struct resource *r; unsigned long tclk_hz; int status = 0; + u32 ncs; master = spi_alloc_master(&pdev->dev, sizeof(*spi)); if (master == NULL) { @@ -366,7 +373,12 @@ static int orion_spi_probe(struct platform_device *pdev) master->mode_bits = SPI_CPHA | SPI_CPOL; master->transfer_one_message = orion_spi_transfer_one_message; - master->num_chipselect = ORION_NUM_CHIPSELECTS; + + if (of_property_read_u32(pdev->dev.of_node, "ncs", &ncs)) + master->num_chipselect = 1; + else + master->num_chipselect = ncs; + master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); platform_set_drvdata(pdev, master); -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
