From: Murali Karicheri <[email protected]> Currently, the driver defines SPI_MAX_CHIPSELECT as 2 and use per device array bytes_per_word based on this. This breaks if num_chipselect per device is greater than 2. This patch fix this and allocate memory for this array based on num_chipselect.
It's preparation patch to enable GPIO CS feature for Davinci SPI. Signed-off-by: Murali Karicheri <[email protected]> Signed-off-by: Grygorii Strashko <[email protected]> --- drivers/spi/spi-davinci.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 50f7509..2477af4 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -38,8 +38,6 @@ #define SPI_NO_RESOURCE ((resource_size_t)-1) -#define SPI_MAX_CHIPSELECT 2 - #define CS_DEFAULT 0xFF #define SPIFMT_PHASE_MASK BIT(16) @@ -142,7 +140,7 @@ struct davinci_spi { void (*get_rx)(u32 rx_data, struct davinci_spi *); u32 (*get_tx)(struct davinci_spi *); - u8 bytes_per_word[SPI_MAX_CHIPSELECT]; + u8 *bytes_per_word; }; static struct davinci_spi_config davinci_spi_default_cfg; @@ -876,6 +874,14 @@ static int davinci_spi_probe(struct platform_device *pdev) /* pdata in dspi is now updated and point pdata to that */ pdata = &dspi->pdata; + dspi->bytes_per_word = devm_kzalloc(&pdev->dev, + sizeof(*dspi->bytes_per_word) * + pdata->num_chipselect, GFP_KERNEL); + if (dspi->bytes_per_word == NULL) { + ret = -ENOMEM; + goto free_master; + } + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (r == NULL) { ret = -ENOENT; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
