Hi Simon,
On Thu, Aug 7, 2014 at 2:41 AM, Simon Horman <[email protected]> wrote:
> On Thu, Aug 07, 2014 at 09:39:08AM +0900, Simon Horman wrote:
>> On Thu, Aug 07, 2014 at 09:37:56AM +0900, Simon Horman wrote:
>> > On Wed, Aug 06, 2014 at 02:59:06PM +0200, Geert Uytterhoeven wrote:
>> > > Add a DMA property to the QSPI node
>> > >
>> > > Signed-off-by: Geert Uytterhoeven <[email protected]>
>> > > Cc: [email protected]
>> > > ---
>> > > This depends on "[PATCH v2 8/8] ARM: shmobile: r8a7791: Add DMAC devices
>> > > to DT" of series "[PATCH v2 0/8] R-Car Gen2 DMA Controller driver".
>> >
>> > Hi Geert, Hi Laurent,
>> >
>> > Am I correct in assuming that with this patch applied things
>> > will continue to work the old way until the patch above applied
>> > to the same tree and from there on the user will get the new behaviour?
>> >
>> > If so I think that I can take this patch as although the driver hasn't been
>> > merged the relevant bindings were added to the subsystem maintainers tree
>> > by "dmaengine: rcar-dmac: Add device tree bindings documentation" and are
>> > available in linux-next.
>> >
>> > Likewise for "[v3] ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIO".
>>
>> ... and "ARM: shmobile: r8a7790 dtsi: Enable DMA for QSPI"
>
> ... and "ARM: shmobile: r8a7790 dtsi: Enable DMA for MSIO"
>
> and any other similar patches I didn't list above :)
Yes[*].
If rcar-dma is not available, drivers fall back to PIO, cfr. for rspi:
-renesas_spi e6b10000.spi: DMA available
+renesas_spi e6b10000.spi: dma_request_slave_channel_compat failed
+renesas_spi e6b10000.spi: DMA not available, using PIO
renesas_spi e6b10000.spi: registered master spi0
spi spi0.0: setup mode 0, 8 bits/w, 30000000 Hz max --> 0
m25p80 spi0.0: s25fl512s (65536 Kbytes)
3 ofpart partitions found on MTD device spi0.0
Creating 3 MTD partitions on "spi0.0":
0x000000000000-0x000000080000 : "loader"
0x000000080000-0x000000100000 : "bootenv"
0x000000100000-0x000004000000 : "data"
renesas_spi e6b10000.spi: registered child spi0.0
and sh-msiof:
-spi_sh_msiof e6e20000.spi: DMA available
+spi_sh_msiof e6e20000.spi: dma_request_slave_channel_compat failed
+spi_sh_msiof e6e20000.spi: DMA not available, using PIO
spi_sh_msiof e6e20000.spi: registered master spi1
spi spi1.0: setup mode 3, 8 bits/w, 6000000 Hz max --> 0
spi_sh_msiof e6e20000.spi: registered child spi1.0
and everything still works, but slower.
[*] If the individual DMA slave drivers properly handle DMA request
failures. If they don't, they will already fail now, as there is no DMA
platform configuration without the dmas/dma-names properties
(ignoring Magnus' DMA prototypes using auxdata, as DT is the way
forward).
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
