A data point for future readers who get this far. I ordered an MK802 which seems to also be a clone with an A10s processor. The Fedora18r2 image finally booted and ran for me, Yeah! If you want Ubuntu instead of Fedora, I found this post: http://permalink.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/2079 which shows after you get Fedora 18 working, you can replace the rootfs with that from the melee-ububtu-lucid image to get a working Ubuntu 10.04 on this clone.
Also, if you prefer debian, I found this post: http://www.modlog.net/?p=763 which says you can actually use the image from the A10s-OLinuXino-MICRO to boot the mk802_a10s. I tried this, and it also worked for me. Finally I found similar to above that if after setting up the OlinuXino image I replace the rootfs with that from debian wheezy: https://www.miniand.com/forums/forums/development/topics/debian-wheezy-lxde-armhf-build this works. Still no networking with the debian, but I see there is a debian-testing: https://www.miniand.com/forums/forums/development/topics/debian-testing-lxde-armhf-build so I will try that combined with the OlinuXino and see what I get. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
