Have you checked to see if your board supports 3TB. I have a cubieboard 2 and it is advertised to take a maximum of 2TB
On Sun, Jan 12, 2014 at 10:25 PM, Andy Valencia <[email protected]>wrote: > -------- > (Regarding corrupt 3TB disk reads when attached via USB dock.) > > I wanted to make sure I wasn't chasing an old problem, so I wrestled > with a build environment and built branch sunxi-3.4 yielding me > a kernel identifying itself as 3.4.75+. Booted with this, and still > see the same problem. > > To make sure I wasn't chasing an ARM/endian hassle, I took the same drive > and dock to a Raspberry PI running Raspbian, and it mounted perfectly. > (That'd be kernel 3.6.11++, FWIW.) So it seems to be Allwinner specific. > If somebody on something other than a Marsboard A20 can try out mounting > an ext4 filesystem of a 3TB drive via a USB SATA dock, that'll help me > narrow it down to my specific platform bits, or more general Allwinner > ones. > > And, of course, if this rings any bells WRT known issues, now would be > a good time to tell me. I'm going to start scaring up level converters > and what-not to get me that serial console with kgdb. > > Thanks, > Andy Valencia > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- Jonathan Aquilina -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
