On Wed, Jan 22, 2014 at 04:52:27PM +0100, Luc Verhaegen wrote:
> On Wed, Jan 22, 2014 at 10:40:49AM -0500, ferar achkar wrote:
> > greetings Luc,
> > I am trying to build a boot-able SD card i.e.
> > *u-boot-sunxi-with-spl.bin* based on u-boot-sunxi source tree, for an
> > INET-K70E board that has currently a working android, I have generated
> > *u-boot-sunxi-with-spl.bin *based on your INet_K70HC board cfg, but it
> > did not boot, can you please advise on how you populated struct
> > dram_para in 'board/sunxi/dram_inet_k70hc.c' file:
> >
> > static struct dram_para dram_para = { /// for INet_K70HC board as
> > authored by Luc Verhaegen <[email protected]> 2014-01-02 06:37:24
> > .clock = 384,
> > .type = 3,
> > .rank_num = 1,
> > .density = 4096,
> > .io_width = 16,
> > .bus_width = 32,
> > .cas = 9,
> > .zq = 0x12331a7f,
> > .odt_en = 0,
> > .size = 1024,
> > .tpr0 = 0x42d899b7,
> > .tpr1 = 0xa090,
> > .tpr2 = 0x22a00,
> > .tpr3 = 0,
> > .tpr4 = 1,
> > .tpr5 = 0,
> > .emr1 = 0x4,
> > .emr2 = 0x10,
> > .emr3 = 0,
> > };
> >
> > since the i have used the same script.bin currently on the nand flash, i
> > am not sure, but i think the dram_para values for INet_K70HC are not
> > correct for the INET-K70E board (below is a snapshot of the board).
> > much appreciated,
> > ferar
>
> Do not send emails to people directly, especially when they are general
> sunxi questions. Use the mailing list.
>
> "it did not boot" could be a great many things. Attach serial and find
> out.
>
> The image attached shows only a tiny part of the board. So it usually
> would not be very useful to begin with.
>
> But... Even with this small part of the board visible, it is clear that
> this is a completely different board from the k70hc. Please work through
> the http://linux-sunxi.org/New_Device_howto meticulously before you do
> anything else.
>
> Luc Verhaegen.
Also, which of datawinds ubislates is this? Ubislate 3G7?
Luc Verhaegen.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
