On Wednesday, January 22, 2014 11:06:18 AM UTC-5, Luc Verhaegen wrote:
> On Wed, Jan 22, 2014 at 04:52:27PM +0100, Luc Verhaegen wrote:
>
> > On Wed, Jan 22, 2014 at 10:40:49AM -0500, ferar achkar wrote:
>
> > > greetings Luc,
>
> > > I am trying to build a boot-able SD card i.e.
>
> > > *u-boot-sunxi-with-spl.bin* based on u-boot-sunxi source tree, for an
>
> > > INET-K70E board that has currently a working android, I have generated
>
> > > *u-boot-sunxi-with-spl.bin *based on your INet_K70HC board cfg, but it
>
> > > did not boot, can you please advise on how you populated struct
>
> > > dram_para in 'board/sunxi/dram_inet_k70hc.c' file:
>
> > >
>
> > > static struct dram_para dram_para = { /// for INet_K70HC board as
>
> > > authored by Luc Verhaegen <[email protected]> 2014-01-02 06:37:24
>
> > > .clock = 384,
>
> > > .type = 3,
>
> > > .rank_num = 1,
>
> > > .density = 4096,
>
> > > .io_width = 16,
>
> > > .bus_width = 32,
>
> > > .cas = 9,
>
> > > .zq = 0x12331a7f,
>
> > > .odt_en = 0,
>
> > > .size = 1024,
>
> > > .tpr0 = 0x42d899b7,
>
> > > .tpr1 = 0xa090,
>
> > > .tpr2 = 0x22a00,
>
> > > .tpr3 = 0,
>
> > > .tpr4 = 1,
>
> > > .tpr5 = 0,
>
> > > .emr1 = 0x4,
>
> > > .emr2 = 0x10,
>
> > > .emr3 = 0,
>
> > > };
>
> > >
>
> > > since the i have used the same script.bin currently on the nand flash, i
>
> > > am not sure, but i think the dram_para values for INet_K70HC are not
>
> > > correct for the INET-K70E board (below is a snapshot of the board).
>
> > > much appreciated,
>
> > > ferar
>
> >
>
> > Do not send emails to people directly, especially when they are general
>
> > sunxi questions. Use the mailing list.
>
> >
>
> > "it did not boot" could be a great many things. Attach serial and find
>
> > out.
>
> >
>
> > The image attached shows only a tiny part of the board. So it usually
>
> > would not be very useful to begin with.
>
> >
>
> > But... Even with this small part of the board visible, it is clear that
>
> > this is a completely different board from the k70hc. Please work through
>
> > the http://linux-sunxi.org/New_Device_howto meticulously before you do
>
> > anything else.
>
> >
>
> > Luc Verhaegen.
>
>
>
> Also, which of datawinds ubislates is this? Ubislate 3G7?
>
>
>
> Luc Verhaegen.
This not a datawind tablet!
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
