Hello everyone, This is my first post to this list, I'd hope someone could help me out.
I've been trying for some days to get an image for the Olinuxino-A10-Lime to boot, but without success. This is kind of my first try to build an image using Yocto Linux, and my first encounter in the embedded Linux world (but I have been using Linux for 15 years or so..). First of all, the meta-sunxi layer doesn't yet support the Olinuxino-A10-Lime board, so I've tried both using other variants available using the same chip, and also to manually hack in the Lime board into the meta-sunxi layer. But so far whatever I've tried I can't get it to boot (the build works fine though). My problems right now is that I have no idea what so ever how to debug this. Since I get no output on the connected HDMI screen. There is a UART connector onboard, would it help to connect this, or in boot what stage will I actually get any output on this? Unfortunately the Lime board has no maual yet, so I'm kind of in the dark. If anyone has any pointers how to move this forward I would really appreciate it. PS! I have tried the Debian image available for the board, and it works ok, but I want to be able to create my own optimized image. If you need me to provide more details, please get back to me and I'll post the details how I build the image using Yocto. /Peter -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
