Ok. So now it boots just fine, but I can't get the HDMI output to work. I'm guessing it might be related to the defconfig I provided for the kernel, which I just copied from the cibieboard config. Anyone have any pointers where to start looking? I've checked the fex file, and it seems correct (using the one provided), but it still won't give me HDMI output.
/Peter Den torsdagen den 6:e mars 2014 kl. 12:59:03 UTC+1 skrev Peter Olsson: > > Ok. More info on this one. I received my USB/UART adapter today, and I > realized it actually does boot - but the HDMI was never initialized during > boot. So I'm digging into this further, hopefully I'll get something > working soon. > > /Peter > > Den tisdagen den 4:e mars 2014 kl. 16:09:34 UTC+1 skrev Peter Olsson: >> >> Thanks for the quick response. I've ordered a USB/UART cable (after I >> realized it used 3.3v instead of RS232 standard). So as soon as I get it I >> will debug further. >> >> I'll report back when I've moved this forward. >> >> /Peter >> >> Den tisdagen den 4:e mars 2014 kl. 11:34:26 UTC+1 skrev John S: >>> >>> >On Tue, 4/3/14, Peter Olsson <[email protected]> wrote: >>> >I've been trying for some days to get an >>> > image for the Olinuxino-A10-Lime to boot, but without >>> >>> Yes, use the UART for debug. >>> >>> But start with an Olimex image and get used to building, booting and >>> seeing what it does on the uart. Olimex blog/wordpress etc often have >>> detailed steps for building and so on. >>> >>> Also, study the schematic a bit compared to boards that are supported to >>> see if any chips are missing or extra as they may help you figure what's >>> wrong, together with the uart debug. >>> >>> John >>> >> -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
