Hi Maxime, This series add support for the GMAC in A31. The GMAC is the same as in the A20, except it has an extra reset control. The GMAC clock module is mostly the same as in the A20, without the extra dividers, which I left out intentionally from the clock driver.
The register offsets and interrupts were copied from A31 SDK in Rhombus Tech's repository. The pin muxes were from the EVB fex file. If you have the A31 datasheet, you could double check them. This series is based on current sunxi-next ( e8176a3b0 ). As I don't have actual A31 hardware, this is only compile tested. Please give it a try, and let me know if it works or not. Cheers, ChenYu Chen-Yu Tsai (5): ARM: sun6i: dt: Add pin muxing options for GMAC ARM: sun6i: dt: Add GMAC clock node to the A31 DTSI ARM: sun6i: dt: Add A31 GMAC gigabit ethernet controller node ARM: sun6i: dt: Add ethernet alias for GMAC ARM: sun6i: columbus: Enable the GMAC arch/arm/boot/dts/sun6i-a31-colombus.dts | 12 +++++ arch/arm/boot/dts/sun6i-a31.dtsi | 87 ++++++++++++++++++++++++++++++++ 2 files changed, 99 insertions(+) -- 1.9.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
