Am Donnerstag, 27. März 2014 19:50:32 UTC+1 schrieb Ezaul Zillmer: > Ok Muito Obrigado! > > > ;) > > Em quinta-feira, 27 de março de 2014 15h19min58s UTC-3, Hans de Goede > escreveu:Hi, > > > > To build this you should do: > > > > make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- Cubieboard2_config > > make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- > > > > Regards, > > > > Hans > > > > > > On 03/27/2014 06:33 PM, Ezaul Zillmer wrote: > > > > > >> > > >> Good Afternoon Doctor Hans > > >> > > >> > > > > > >> Updated my u-boot > > >> > > >> I wonder how was the logic I tried to compile it like this: > > > > > > ./mkconfig ARCH=arm CPU=armv7 SOC=sunxi BOARD=Cubieboard2 > > > > > >> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- > > >>> > > >> > > >>> No dick: (could correct me where I am going wrong! > > >> > > >> > > >>> Hug Since Thank you much longer > > >> > > >> > > >
Hi Hans, I tested the new u-boot with your newest kernel (3.14.0-rc8+) on the cubietruck. I found two issues so far. It seems that only one CPU is initialized correctly: [ 0.049402] /cpus/cpu@0 missing clock-frequency property [ 0.049433] /cpus/cpu@1 missing clock-frequency property [ 0.049447] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.049479] Setting up static identity map for 0x4073f2d0 - 0x4073f368 [ 0.058595] CPU1: failed to boot: -38 [ 0.058647] Brought up 1 CPUs [ 0.058655] SMP: Total of 1 processors activated. [ 0.058662] CPU: All CPU(s) started in SVC mode. [ 0.059721] devtmpfs: initialized [ 0.064475] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 Also kvm does not work and there is no /dev/kvm device. [ 0.176760] kvm [1]: HYP mode not available Here is the full dmesg output: http://pastebin.com/V72FAzmp Greetings Markus -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
