Hi,

On 03/30/2014 11:37 PM, [email protected] wrote:
> Am Donnerstag, 27. März 2014 19:50:32 UTC+1 schrieb Ezaul Zillmer:
>> Ok Muito Obrigado!
>>
>>
>> ;)
>>
>> Em quinta-feira, 27 de março de 2014 15h19min58s UTC-3, Hans de Goede  
>> escreveu:Hi,
>>
>>
>>
>> To build this you should do:
>>
>>
>>
>> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- Cubieboard2_config
>>
>> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
>>
>>
>>
>> Regards,
>>
>>
>>
>> Hans
>>
>>
>>
>>
>>
>> On 03/27/2014 06:33 PM, Ezaul Zillmer wrote:
>>
>>>
>>
>>>>
>>
>>>> Good Afternoon Doctor Hans 
>>
>>>>
>>
>>>>  
>>
>>>
>>
>>>> Updated my u-boot
>>
>>>>
>>
>>>>       I wonder how was the logic I tried to compile it like this: 
>>
>>>      
>>
>>>       ./mkconfig ARCH=arm CPU=armv7 SOC=sunxi BOARD=Cubieboard2 
>>
>>>
>>
>>>> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
>>
>>>>>
>>
>>>>
>>
>>>>> No dick: (could correct me where I am going wrong! 
>>
>>>>
>>
>>>>
>>
>>>>> Hug Since Thank you much longer
>>
>>>>
>>
>>>>
>>
>>>
> 
> Hi Hans,
> 
> I tested the new u-boot with your newest kernel (3.14.0-rc8+) on the 
> cubietruck.
> 
> I found two issues so far. It seems that only one CPU is initialized 
> correctly:
> 
> [    0.049402] /cpus/cpu@0 missing clock-frequency property
> [    0.049433] /cpus/cpu@1 missing clock-frequency property
> [    0.049447] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [    0.049479] Setting up static identity map for 0x4073f2d0 - 0x4073f368
> [    0.058595] CPU1: failed to boot: -38
> [    0.058647] Brought up 1 CPUs
> [    0.058655] SMP: Total of 1 processors activated.
> [    0.058662] CPU: All CPU(s) started in SVC mode.
> [    0.059721] devtmpfs: initialized
> [    0.064475] VFP support v0.3: implementor 41 architecture 2 part 30 
> variant 7 rev 4
> 
> Also kvm does not work and there is no /dev/kvm device. 
> [    0.176760] kvm [1]: HYP mode not available
> 
> Here is the full dmesg output: http://pastebin.com/V72FAzmp

Did you use the sunxi-next branch ? What you're seeing is typical behavior from 
using
the regular sunxi branch of u-boot-sunxi.

Regards,

Hans

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to