Hi All, This patch series adds basic support for sun6i. There are some bits there to get SPL support going (clock setup, axp related code has been tested in SPL mode too), but DRAM setup is missing, so no SPL support.
This series will give you a u-boot.bin binary which can be used to generate the u-boot.bin on an sdcard image generated by the allwinner tools. This u-boot.bin supports reading from mmc, has proper fdt support, and properly sets up all the power supply voltages on the axp221: -properly power the gpio's and sdcard at 3.3v, rather then undervolt them at 3v -activate ldo1, and thus give power to the phy, so now we can go and test wens gmac for a31 work If there are no objections I plan to push this series to the u-boot-sunxi repo sunxi branch in a couple of days. In the mean time you can find it here: https://github.com/jwrdegoede/u-boot-sunxi/commits/sunxi-a31-axp221 Regards, Hans -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
