Hi, On 04/03/2014 05:22 PM, Stefan Monnier wrote: >>> This is probably a silly error in my kernel's .config, but I can't >>> figure out what's missing. The boot log ends with: >>> >>> [ 1.199004] mmcblk0: mmc0:b368 244 MiB >>> [ 1.204422] mmcblk0: p1 >>> [ 1.326049] ata1.00: ATA-8: WDC WD20NPVT-00Z2TT0, 01.01A01, max UDMA/133 >>> [ 1.332786] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) >>> [ 1.340896] ata1.00: configured for UDMA/133 >>> [ 1.349995] scsi 0:0:0:0: Direct-Access ATA WDC WD20NPVT-00Z >>> 01.0 PQ: 0 ANSI: 5 >>> [ 1.362511] VFS: Cannot open root device "sda1" or unknown-block(0,0): >>> error -6 >>> [ 1.374684] Please append a correct "root=" boot option; here are the >>> available partitions: >>> [ 1.388593] b300 249856 mmcblk0 driver: mmcblk >>> [ 1.393994] b301 220000 mmcblk0p1 0006ca47-01 >>> [ 1.399368] Kernel panic - not syncing: VFS: Unable to mount root fs on >>> [...] > >> It panics while it is still scanning the disk, looks like you need to >> add rootwait to your kernel cmd line. > > I tried rootwait but it doesn't get me further. The bootlog ends with:
Ah, probably a classic case of not having the sd module built-in then. Make sure scsi-disk support in your .config is set to y not m. Regards, Hans -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
