Hi, On 05/07/2014 08:24 AM, Димитър Гамишев wrote: > Hi All, > this patch adds u-boot support for a13-som boards by Olimex
AFAIK the a13-som is not officially released yet. It seems a bit early to add support for it, what if the final version is different. Also your patch is hopelessly mangled next time please use git send-email to send patches. Regards, Hans > > diff --git board/sunxi/Makefile board/sunxi/Makefile > index 99445bf..0b57707 100644 > --- board/sunxi/Makefile > +++ board/sunxi/Makefile > @@ -72,3 +72,4 @@ obj-$(CONFIG_WEXLER_TAB_7200) += dram_wexler_tab_7200.o > obj-$(CONFIG_WOBO_I5) += dram_wobo_i5.o > obj-$(CONFIG_XZPAD700) += dram_xzpad700.o > obj-$(CONFIG_ZATAB) += dram_zatab.o > +obj-$(CONFIG_A13_SOM) += dram_a13_som.o > diff --git boards.cfg boards.cfg > index d3a1e50..25c2cda 100644 > --- boards.cfg > +++ boards.cfg > @@ -453,6 +453,8 @@ Active arm armv7 sunxi - > sunxi > Active arm armv7 sunxi - sunxi > wobo-i5 sun5i:WOBO_I5,SPL,STATUSLED=34 > > - > Active arm armv7 sunxi - sunxi > xzpad700 sun5i:XZPAD700,SPL > > - > Active arm armv7 sunxi - sunxi > zatab sun4i:ZATAB,SPL > > - > +Active arm armv7 sunxi - sunxi > a13-som > sun5i:A13_SOM,SPL,NO_AXP,STATUSLED=201,CONS_IN > + - > Active arm armv7 u8500 st-ericsson snowball > snowball - > > Mathieu Poirier <[email protected]> > Active arm armv7 u8500 st-ericsson u8500 > u8500_href - > > - > Active arm armv7 vf610 freescale vf610twr > vf610twr > vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg > Alison Wang > <[email protected]> > new file mode 100644 > index 0000000..b6e57e7 > --- /dev/null > +++ b/board/sunxi/dram_a13_som.c > @@ -0,0 +1,32 @@ > +/* this file is generated, don't edit it yourself */ > + > +#include <common.h> > +#include <asm/arch/dram.h> > + > +static struct dram_para dram_para = { > + .clock = 408, > + .type = 3, > + .rank_num = 1, > + .density = 4096, > + .io_width = 16, > + .bus_width = 16, > + .cas = 9, > + .zq = 123, > + .odt_en = 0, > + .size = 512, > + .tpr0 = 0x42d899b7, > + .tpr1 = 0xa090, > + .tpr2 = 0x22a00, > + .tpr3 = 0, > + .tpr4 = 0, > + .tpr5 = 0, > + .emr1 = 0, > + .emr2 = 0x10, > + .emr3 = 0, > + > +}; > + > +unsigned long sunxi_dram_init(void) > +{ > + return dramc_init(&dram_para); > +} > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
