Hi Pillar I was only testing from uboot, I used ping and tftp.
I can't thank you enough for your response, I'm going to try pcDuino3 uboot and uImage as soon as I get home and will post the results. I'm hoping your use of GMAC resolves my issue. Bruce On Fri, Jun 27, 2014 at 10:32 AM, 左宝柱 <[email protected]> wrote: > pcDuinov3 uboot (running on A20-SOM) ethernet else working. > U-Boot 2014.04-01537-g257ae94 (Jun 26 2014 - 11:12:14) Allwinner Technology > > CPU: Allwinner A20 (SUN7I) > Board: Linksprite_pcDuino3 > I2C: ready > DRAM: 1 GiB > MMC: SUNXI SD/MMC: 0 > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Net: dwmac.1c50000 > Hit any key to stop autoboot: 0 > reading uEnv.txt > 322 bytes read in 16 ms (19.5 KiB/s) > Loaded environment from uEnv.txt > Running uenvcmd ... > Speed: 100, full duplex > BOOTP broadcast 1 > DHCP client bound to address 192.168.1.119 > Speed: 100, full duplex > Using dwmac.1c50000 device > TFTP from server 192.168.1.100; our IP address is 192.168.1.119 > Filename 'arch/arm/boot/uImage'. > Load address: 0x46000000 > Loading: ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################# > 340.8 KiB/s > done > Bytes transferred = 8351104 (7f6d80 hex) > Speed: 100, full duplex > Using dwmac.1c50000 device > TFTP from server 192.168.1.100; our IP address is 192.168.1.119 > Filename 'arch/arm/boot/dts/sun7i-a20-pcduino3.dtb'. > Load address: 0x49000000 > Loading: ## > 294.9 KiB/s > done > Bytes transferred = 21183 (52bf hex) > ## Booting kernel from Legacy Image at 46000000 ... > Image Name: Linux-3.15.0-rc6-01550-g119918d- > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 8351040 Bytes = 8 MiB > Load Address: 40008000 > Entry Point: 40008000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 49000000 > Booting using the fdt blob at 0x49000000 > Loading Kernel Image ... OK > Using Device Tree in place at 49000000, end 490082be > > Starting kernel ... > > [ 0.000000] Booting Linux on physical CPU 0x0 > > > Do you test ethernet other way? > > > Pillar > > -- > You received this message because you are subscribed to a topic in the > Google Groups "linux-sunxi" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/linux-sunxi/nRXlsqemDt8/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
