So is AP6210 support in mainline 3.16-rc1? I don't have a wireless device when I boot it but I do get some log messages at boot....
Can the AP6210 be probed? I don't see anything in the Cubietruck DTS loading the driver. This is on Emilio's DMA tree. http://git.elopez.com.ar/linux/commits/branch/sunxi-dma [ 1.809112] mmc1: new high speed SDIO card at address 0001 [ 1.815717] brcmfmac: F1 signature read @0x18000000=0x1591a962 [ 2.835866] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 3.856501] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 root@linaro-developer:/sys/bus/sdio/drivers/brcmfmac_sdio# ls bind mmc1:0001:2 uevent unbind root@linaro-developer:~# iwconfig lo no wireless extensions. eth0 no wireless extensions. root@linaro-developer:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 70:71:bc:b8:ab:ee inet addr:192.168.1.51 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::7271:bcff:feb8:abee/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22633 errors:0 dropped:1 overruns:0 frame:0 TX packets:15840 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14764356 (14.7 MB) TX bytes:2613688 (2.6 MB) Interrupt:117 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@linaro-developer:~# root@linaro-developer:/lib/firmware/brcm# ls bcm4329-fullmac-4.bin brcmfmac43241b0-sdio.bin brcmfmac4334-sdio.bin bcm43xx-0.fw brcmfmac43241b4-sdio.bin brcmfmac4335-sdio.bin bcm43xx_hdr-0.fw brcmfmac4329-sdio.bin brcmfmac43362-sdio.bin brcmfmac43236b.bin brcmfmac4330-sdio.bin brcmfmac43362-sdio.txt root@linaro-developer:/lib/firmware/brcm# -- Jon Smirl [email protected] -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
