its booting in cubieboard. but it is saying the following messages ========== WLAN placed in POWER ON ======== [ 18.989643] =========== WLAN placed in POWER ON ========
failed to power up wifi chip, retry again (4 left) ** [ 20.998711] [ 20.998717] failed to power up wifi chip, retry again (4 left) ** [ 20.998722] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON [ 21.014845] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON [wifi_pm]: No select wifi, please check your config !! [ 21.028358] [wifi_pm]: No select wifi, please check your config !! =========== WLAN placed in POWER OFF ======== [ 21.038725] =========== WLAN placed in POWER OFF ======== dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON [ 21.051081] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON [wifi_pm]: No select wifi, please check your config !! [ 21.064603] [wifi_pm]: No select wifi, please check your config !! =========== WLAN placed in POWER ON ======== [ 21.175909] =========== WLAN placed in POWER ON ======== failed to power up wifi chip, retry again (3 left) ** [ 23.178694] [ 23.178699] failed to power up wifi chip, retry again (3 left) ** [ 23.178704] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON [ 23.194814] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON [wifi_pm]: No select wifi, please check your config !! [ 23.208292] [wifi_pm]: No select wifi, please check your config !! =========== WLAN placed in POWER OFF ======== [ 23.218601] =========== WLAN placed in POWER OFF ======== dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON [ 23.230954] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON [wifi_pm]: No select wifi, please check your config !! [ 23.244527] [wifi_pm]: No select wifi, please check your config !! =========== WLAN placed in POWER ON ======== [ 23.354615] =========== WLAN placed in POWER ON ======== failed to power up wifi chip, retry again (2 left) ** [ 25.358695] [ 25.358700] failed to power up wifi chip, retry again (2 left) ** [ 25.358705] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON [ 25.374809] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON [wifi_pm]: No select wifi, please check your config !! [ 25.388291] [wifi_pm]: No select wifi, please check your config !! =========== WLAN placed in POWER OFF ======== [ 25.398590] =========== WLAN placed in POWER OFF ======== dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON [ 25.410935] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON [wifi_pm]: No select wifi, please check your config !! [ 25.424445] [wifi_pm]: No select wifi, please check your config !! =========== WLAN placed in POWER ON ======== [ 25.534597] =========== WLAN placed in POWER ON ======== failed to power up wifi chip, retry again (1 left) ** [ 27.538692] [ 27.538697] failed to power up wifi chip, retry again (1 left) ** [ 27.538702] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON [ 27.554814] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON [wifi_pm]: No select wifi, please check your config !! [ 27.568282] [wifi_pm]: No select wifi, please check your config !! =========== WLAN placed in POWER OFF ======== [ 27.578590] =========== WLAN placed in POWER OFF ======== failed to power up wifi chip, max retry reached, exits ** [ 27.589469] [ 27.589472] failed to power up wifi chip, max retry reached, exits ** [ 27.589477] ERROR: could not insert 'bcmdhd': No such device On Friday, August 1, 2014 1:42:30 PM UTC+5:30, [email protected] wrote: > > Am Freitag, 1. August 2014 10:00:13 UTC+2 schrieb Nithin Chakravarthy: > > Thank you for that. so pls tell me how to make cubietruck as hotspot > > > Why dont you read the thread in cubietech-org i posted to you ? Read the > titel of that tread. > "Topic: Wheezy server for SD, SATA or NAND with hotspot (!!!!!) & BT - > update 11.7.2014" > > or just do a simple search in the forum ? > http://www.cubieforums.com/index.php/topic,2560.msg16981.html#msg16981 > > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
