I have tried with changes in the script file. Now it s turning on the wifi chipset with out errors. I have to check whether it supports AP, chnages i had made in script file
[wifi_para] wifi_mod_sel = 7 ap6xxx_lpo = port:PI12<4><default><default><default> bt_used = 1 the boot message 4.724689] =========== WLAN placed in POWER ON ======== [ 4.730657] [mmc-err] smc 3 err, cmd 52, RTO [ 4.736338] [mmc-err] smc 3 err, cmd 52, RTO [ 4.741229] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 4.754135] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 4.766469] [mmc-err] smc 3 err, cmd 8, RTO [ 4.771565] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 4.791219] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.798868] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.806529] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.815372] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.834833] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 4.845283] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 4.911001] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 4.923525] mmc1: new high speed SDIO card at address 0001 [ 4.930625] bcmsdh_register: Linux Kernel SDIO/MMC Driver [ 4.936870] bcm_wlan_get_oob_irq enter. [ 4.941161] bcm_wlan_get_oob_irq GPIO(WL_HOST_WAKE) = 60 [ 4.947411] dhdsdio_probe : no mutex held. set lock [ 4.953005] F1 signature read @0x18000000=0x1591a962 [ 4.991892] bcmsdh_config_hw_oob_intr: Enable HW OOB for 43362 [ 5.001324] DHD: dongle ram size is set to 245760(orig 245760) [ 5.009820] wl_create_event_handler thr:312 created [ 5.015268] wl_create_event_handler thr:312 started [ 5.022855] p2p0: P2P Interface Registered [ 5.027572] dhd_attach thr:319 created [ 5.031759] dhd_attach thr:319 started [ 5.035999] dhd_attach thr:31a created [ 5.040213] dhd_attach thr:31a started [ 5.044452] dhd_attach thr:31b created [ 5.048751] dhd_attach thr:31b started [ 5.054657] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33 On Friday, August 1, 2014 4:44:20 PM UTC+5:30, [email protected] wrote: > > There are four ! We should stop this diskussion in this sunxi kernel > development mailing list. Go to the http://www.cubieforums.com/index.php > <http://www.google.com/url?q=http%3A%2F%2Fwww.cubieforums.com%2Findex.php&sa=D&sntz=1&usg=AFQjCNFcFB5J92qzKO_Pel-GCWkIBegNuA> > > forum and open a thread with your problem. Dont forget to describe your > system setup and your steps that have been tried sofar. > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
