Hi Il 08/set/2014 15:36 "Chen-Yu Tsai" <[email protected]> ha scritto: > > From: Maxime Ripard <[email protected]> > > Signed-off-by: Maxime Ripard <[email protected]> > Signed-off-by: Hans de Goede <[email protected]> > [[email protected]: commit message was "ARM: sunxi: Setup the A31 UART0 muxing"] > Signed-off-by: Chen-Yu Tsai <[email protected]> > --- > arch/arm/cpu/armv7/sunxi/board.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c > index f2cedbb..fc6aa4b 100644 > --- a/arch/arm/cpu/armv7/sunxi/board.c > +++ b/arch/arm/cpu/armv7/sunxi/board.c > @@ -54,6 +54,10 @@ int gpio_init(void) > sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); > sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); > sunxi_gpio_set_pull(SUNXI_GPB(23), 1); > +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN6I) > + sunxi_gpio_set_cfgpin(SUNXI_GPH(20), 2); > + sunxi_gpio_set_cfgpin(SUNXI_GPH(21), 2); > + sunxi_gpio_set_pull(SUNXI_GPH(21), 1); > #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I) > sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX); > sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX); > -- > 2.1.0 >
I don't know if it is correct that every architecture has a specific function to MUX, but can we define what is 2 2 and 1? Michael > _______________________________________________ > U-Boot mailing list > [email protected] > http://lists.denx.de/mailman/listinfo/u-boot -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
