On Mon, 13 Oct 2014 13:09:59 +0200 Hans de Goede <[email protected]> wrote:
> Hi, > > On 10/04/2014 07:53 AM, Siarhei Siamashka wrote: > > The dcdc3 voltage is expected to be set by the bootloader and the right > > voltage depends on the DRAM settings (higher clock speed needs more > > voltage). Allowing to use the 'dcdc3_vol' parameter from the FEX file > > only introduces an unnecessary fragile dependency between the settings > > in u-boot and the settings in FEX. So now we ignore this parameter in > > FEX and keep the original dcdc3 voltage set by the bootloader. > > > > The dmesg log now looks like this: > > > > [ 2.212941] axp20_ldo1: 1300 mV > > [ 2.221370] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV > > [ 2.231662] axp20_ldo3: 700 <--> 3500 mV at 2800 mV > > [ 2.241747] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV > > [ 2.251906] axp20_buck2: 700 <--> 2275 mV at 1400 mV > > [ 2.263430] somebody is trying to set dcdc3 range to (1300000, 1300000) > > uV > > [ 2.275327] but we keep dcdc3 = 1250000 uV from the bootloader > > [ 2.285406] axp20_buck3: 700 <--> 3500 mV at 1250 mV > > [ 2.295299] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV > > > > Signed-off-by: Siarhei Siamashka <[email protected]> > > Looks good: > > Acked-by: Hans de Goede <[email protected]> Thanks for the review. Pushed to stage/sunxi-3.4 -- Best regards, Siarhei Siamashka -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
