On 15 December 2014 at 12:38, Hans de Goede <[email protected]> wrote:
> Hi, > > On 15-12-14 11:21, Code Kipper wrote: > >> >>> usb0 (otg): usb-a receptacle 1 (labeled 1 on the box, 0 on the print) >>> usb1 (ehci): routed to internal wifi >>> usb2 (ehci): usb-a receptacle 2 (labeled 2 on both the box and the print) >>> >>> I'm using fel mode with an usb-a <-> usb-a cable connected to usb0 on >>> the cs908. The cs908 has no fel button, so I've hooked up the serial >>> console, >>> and then keep 2 pressed on the serial console while inserting the usb-a >>> into >>> the PC (which will also power the board). boot0 from the nand will then >>> jump >>> into fel mode when it sees the 2 keypress. >>> >>> >> Hi Hans, >> >> I'm looking to try this on my vidon box which like the cs908 doesn't have >> OTG >> or a fel button. Just would like to confirm the wiring on the usb-a 2 >> usb-a >> male >> cable. Are they connected one to one i.e. 5v <-> 5v, D+ <-> D+ etc or are >> the >> data lines twisted. i.e. D+ <-> D- and vice versa?. >> > > I don't know, I just picked a A <-> A cable out of my box with usb cables > (some regular usb devices actually ship with an A receptacle instead of a > B) > used that and things just worked. So I would say whatever standard A <-> A > cables are using. > I've seen them with a few test boxes but nothing that I've ever bought. I quick scan on ebay and they seem to be readily available. I'll practice fel on my other A31 box whilst I'm waiting for delivery. Thanks for the info, CK > > Regards, > > Hans > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
