On Wed, 2015-01-14 at 11:42 +0100, Lars Doelle wrote: > Hi everyone, > > tuning device configuration for [[Inet K970]], I did not yet find > switches in the mainline kernel for the following features: > > 1) sunxi-keyboard > > This provides an event device for the buttons of the tablet. > Since this driver is not mainline, i wonder if some replacement > should be used, e.g. GPIO_BUTTONS or something?
Will be in next mainline kernel: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/313485.html > > 2) power button Almost there: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/311967.html > > in sunxi-linux, this button is provided by axp209 on a separate > event device. Anything one could switch on in mainline to make this > available? > > 3) power information There's a patch for that too, but it's still RFC phase (and somewhat depending on 2): http://lists.infradead.org/pipermail/linux-arm-kernel/2014-October/295547.html > in sunxi-linux, rich information about the current power state is > provided through /sys/class/power_supply. This is empty in > mainline. What to switch on in mainline's kernel config? > > If anyone knows, that the above features are not supported > in mainline, yet, this information would also help. We are trying to track everything that is being worked on here: http://linux-sunxi.org/Linux_mainlining_effort -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
