The module 0 style clocks, or storage module clocks as named in the official SDK, are almost the same as the module 0 clocks on earlier Allwinner SoCs. The only difference is wider mux register bits.
As with earlier Allwinner SoCs, mmc module clocks are a special case of mod0 clocks, with phase controls for 2 child clocks, output and sample. This patch adds support for both. Signed-off-by: Chen-Yu Tsai <[email protected]> --- Documentation/devicetree/bindings/clock/sunxi.txt | 7 +++-- drivers/clk/sunxi/clk-mod0.c | 32 +++++++++++++++++++++++ 2 files changed, 37 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index e4c42276c577..0dfd018ba47b 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -56,7 +56,9 @@ Required properties: "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23 "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 "allwinner,sun4i-a10-mmc-clk" - for the MMC clock + "allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80 "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks + "allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80 "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 "allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 @@ -72,7 +74,8 @@ Required properties for all clocks: - #clock-cells : from common clock binding; shall be set to 0 except for the following compatibles where it shall be set to 1: "allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk", - "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk" + "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk", + "allwinner,*-usb-clk", "allwinner,*-mmc-clk" - clock-output-names : shall be the corresponding names of the outputs. If the clock module only has one output, the name shall be the module name. @@ -94,7 +97,7 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output is the normal PLL6 output, or "pll6". The second output is rate doubled PLL6, or "pll6x2". -The "allwinner,sun4i-a10-mmc-clk" has three different outputs: the +The "allwinner,*-mmc-clk" clocks have three different outputs: the main clock, with the ID 0, and the output and sample clocks, with the IDs 1 and 2, respectively. diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c index 4430d1398ce6..ec8f5a1fca09 100644 --- a/drivers/clk/sunxi/clk-mod0.c +++ b/drivers/clk/sunxi/clk-mod0.c @@ -130,6 +130,30 @@ static struct platform_driver sun4i_a10_mod0_clk_driver = { }; module_platform_driver(sun4i_a10_mod0_clk_driver); +static const struct factors_data sun9i_a80_mod0_data __initconst = { + .enable = 31, + .mux = 24, + .muxmask = BIT(3) | BIT(2) | BIT(1) | BIT(0), + .table = &sun4i_a10_mod0_config, + .getter = sun4i_a10_get_mod0_factors, +}; + +static void __init sun9i_a80_mod0_setup(struct device_node *node) +{ + void __iomem *reg; + + reg = of_io_request_and_map(node, 0, of_node_full_name(node)); + if (IS_ERR(reg)) { + pr_err("Could not get registers for mod0-clk: %s\n", + node->name); + return; + } + + sunxi_factors_register(node, &sun9i_a80_mod0_data, + &sun4i_a10_mod0_lock, reg); +} +CLK_OF_DECLARE(sun9i_a80_mod0, "allwinner,sun9i-a80-mod0-clk", sun9i_a80_mod0_setup); + static DEFINE_SPINLOCK(sun5i_a13_mbus_lock); static void __init sun5i_a13_mbus_setup(struct device_node *node) @@ -358,3 +382,11 @@ static void __init sun4i_a10_mmc_setup(struct device_node *node) sunxi_mmc_setup(node, &sun4i_a10_mod0_data, &sun4i_a10_mmc_lock); } CLK_OF_DECLARE(sun4i_a10_mmc, "allwinner,sun4i-a10-mmc-clk", sun4i_a10_mmc_setup); + +static DEFINE_SPINLOCK(sun9i_a80_mmc_lock); + +static void __init sun9i_a80_mmc_setup(struct device_node *node) +{ + sunxi_mmc_setup(node, &sun9i_a80_mod0_data, &sun9i_a80_mmc_lock); +} +CLK_OF_DECLARE(sun9i_a80_mmc, "allwinner,sun9i-a80-mmc-clk", sun9i_a80_mmc_setup); -- 2.1.4 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
