Hi Everyone,
i am using a31 hummingbird board ,i need to boot from sd card (LINUX
OS) , I burn image using phoenixsuit in windows, into sd card,
log message:
---------------
boot0 version : 3.0.0
reg_addr 0x01HELLO! BOOT0 is starting!
boot0 version : 3.0.0
reg_addr 0x01f00100 =0x00000000
reg_addr 0x01f00104 =0x0000703b
reg_addr 0x01f00108 =0x000000ff
reg_addr 0x01f0010c =0x000000ff
reg_addr 0x01f00110 =0x000000ff
reg_addr 0x01f00114 =0x000000ff
[DRAM]ver 1.03 clk = 240
cpu 3 pmu 0
dram size =1024
sum=0xc0fe9d5b
src_sum=0xc0fe9d5b
Ready to disable icache.
Jump to secend Boot.
[ 0.214]
U-Boot 2011.09-rc1 (Jun 17 2014 - 17:30:56) Allwinner Technology
[ 0.222]version: 1.1.0
[ 0.225]pmbus: ready
[ 0.227]PMU: AXP221
[ 0.230]PMU: AXP22x found
[ 0.232]PMU: bat ratio = 100
[ 0.235]PMU: dcdc3 1260
[ 0.238]PMU: pll1 1008 Mhz
dcdc1_vol = 3000
dcdc2_vol = 1200
dcdc3_vol = 1260
dcdc4_vol = 1200
dcdc5_vol = 1500
aldo1_vol = 3000
aldo2_vol = 1800
aldo3_vol = 3000
eldo3_vol = 1800
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.282]DRAM: 1 GiB
relocation Offset is: 15b25000
donn't initialize ther user_gpio (main_key:boot_init_gpio)
deu_mode1 not exist.
lcdgamma4iep for lcd1 not exist.
DRV_DISP_Init: opened
[ 0.557]fetch script data boot_disp.output_type fail
[ 0.562]fetch script data boot_disp.output_mode fail
[ 0.567]fetch script data boot_disp.auto_hpd fail
[ 0.572]lcd0_para.lcd_used=1
workmode = 0
[ 0.618]NAND: NAND_UbootInit
NB1 : enter NAND_LogicInit
not burn nand partition table!
NB1 : nand_info_init fail
[ 6.752]nand init fail
fail to find part named env
Using default environment
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
mbr not exist
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
cant find rcvy value
cant find fstbt value
no misc partition is found
to be run cmd=run setargs_nand boot_normal
WORK_MODE_BOOT
WORK_MODE_BOOT
[ 6.788]Hit any key to stop autoboot: 0
cant find part named boot
sunxi_flash - sunxi_flash sub-system
Usage:
sunxi_flash read command parmeters :
parmeters 0 : addr to load(hex only)
parmeters 1 : the name of the part to be load
[parmeters 2] : the number of bytes to be load(hex only)
if [parmeters 2] not exist, the number of bytes to be load is the size of
the part indecated on partemeter 1
sunxi signature fail: unable to get the signature table
boota: bad boot image magic, maybe not a boot.img?
sunxi#
How to solve this problem , please help me.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
