HI, I have same problem, do you solve it ?
Gangadhar V於 2015年2月5日星期四 UTC+8下午5時36分33秒寫道： > Hi Everyone, > > i am using a31 hummingbird board ,i need to boot from sd card (LINUX OS) > , I burn image using phoenixsuit in windows, into sd card, > > > log message: > --------------- > > > boot0 version : 3.0.0 > reg_addr 0x01HELLO! BOOT0 is starting! > boot0 version : 3.0.0 > reg_addr 0x01f00100 =0x00000000 > reg_addr 0x01f00104 =0x0000703b > reg_addr 0x01f00108 =0x000000ff > reg_addr 0x01f0010c =0x000000ff > reg_addr 0x01f00110 =0x000000ff > reg_addr 0x01f00114 =0x000000ff > [DRAM]ver 1.03 clk = 240 > cpu 3 pmu 0 > dram size =1024 > sum=0xc0fe9d5b > src_sum=0xc0fe9d5b > Ready to disable icache. > Jump to secend Boot. > [ 0.214] > > U-Boot 2011.09-rc1 (Jun 17 2014 - 17:30:56) Allwinner Technology > > [ 0.222]version: 1.1.0 > [ 0.225]pmbus: ready > [ 0.227]PMU: AXP221 > [ 0.230]PMU: AXP22x found > [ 0.232]PMU: bat ratio = 100 > [ 0.235]PMU: dcdc3 1260 > [ 0.238]PMU: pll1 1008 Mhz > dcdc1_vol = 3000 > dcdc2_vol = 1200 > dcdc3_vol = 1260 > dcdc4_vol = 1200 > dcdc5_vol = 1500 > aldo1_vol = 3000 > aldo2_vol = 1800 > aldo3_vol = 3000 > eldo3_vol = 1800 > find power_sply to end > fel key old mode > run key detect > no key found > no key input > dram_para_set start > dram_para_set end > [ 0.282]DRAM: 1 GiB > relocation Offset is: 15b25000 > donn't initialize ther user_gpio (main_key:boot_init_gpio) > deu_mode1 not exist. > lcdgamma4iep for lcd1 not exist. > DRV_DISP_Init: opened > [ 0.557]fetch script data boot_disp.output_type fail > [ 0.562]fetch script data boot_disp.output_mode fail > [ 0.567]fetch script data boot_disp.auto_hpd fail > [ 0.572]lcd0_para.lcd_used=1 > workmode = 0 > [ 0.618]NAND: NAND_UbootInit > NB1 : enter NAND_LogicInit > not burn nand partition table! > NB1 : nand_info_init fail > [ 6.752]nand init fail > fail to find part named env > Using default environment > > In: serial > Out: serial > Err: serial > --------fastboot partitions-------- > mbr not exist > base bootcmd=run setargs_nand boot_normal > bootcmd set setargs_nand > key 0 > cant find rcvy value > cant find fstbt value > no misc partition is found > to be run cmd=run setargs_nand boot_normal > WORK_MODE_BOOT > WORK_MODE_BOOT > [ 6.788]Hit any key to stop autoboot: 0 > cant find part named boot > sunxi_flash - sunxi_flash sub-system > > Usage: > sunxi_flash read command parmeters : > parmeters 0 : addr to load(hex only) > parmeters 1 : the name of the part to be load > [parmeters 2] : the number of bytes to be load(hex only) > if [parmeters 2] not exist, the number of bytes to be load is the size of the > part indecated on partemeter 1 > sunxi signature fail: unable to get the signature table > boota: bad boot image magic, maybe not a boot.img? > sunxi# > > > How to solve this problem , please help me. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
