Pictures of it can be found here: http://www.techpowerup.com/reviews/Giada/Q11/4.html Com port on left side does not output anything. Port in front of sata connector might be a usb connection but unknown. Multimeter shows that 1st port on left when viewing from front outputs 4.76V on 20 Vdc settings. 4th port from left pulls a 20k Ohms setting to 0. USB 3.0 port on the right side is USB OTG connection. Using a USB A to USB A connection and pressing the far back button on the left side sets it to FEL Mode. Firmware that is flashable to the device in FEL Mode: http://download.giadatech.com.cn/driver/jt/Q11_v18_4.0.4_20130226_P008.rar Booting off of SD Card slot works. Was able to boot an MK802 Linux firmware without issues. Processor is an Allwinner A10.
Yes I am a noob with this stuff. If anyone needs any more info, i'll be glad to provide it. I'll see about extracting the files from /boot and the MBR and adding it to this thread. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
