I have tired the the latest upstream u-boot for Banana Pro, but get error like below:
CPU: Allwinner A20 (SUN7I) I2C: ready DRAM: 1015 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment Reserved 9216kB of RAM for Framebuffer. HDMI connected: Setting up a 1024x768 hdmi console In: serial Out: vga Err: vga SCSI: SUNXI SCSI INIT SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: dwmac.1c50000 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Unknown command 'part' - try 'help' scanning bus for devices... Found 0 device(s). SCSI device 0: Device 0: not available What may be the problem? Tony Zhang -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.