Thanks for Karsten and Hans. I will try tomorrow. ------------------------------ Tony Zhang
*From:* Hans de Goede <[email protected]> *Date:* 2015-02-07 20:40 *To:* linux-sunxi <[email protected]> *Subject:* Re: [linux-sunxi] Banana Pro use upstream uboot problem Hi, On 02/07/2015 12:48 PM, [email protected] wrote: > I have tired the the latest upstream u-boot for Banana Pro, but get error like below: > You need the attached patch for upstream u-boot/master to work on sunxi devices, this should get merged upstream soon. Regards, Hans > > CPU: Allwinner A20 (SUN7I) > I2C: ready > DRAM: 1015 MiB > MMC: SUNXI SD/MMC: 0 > *** Warning - bad CRC, using default environment > > Reserved 9216kB of RAM for Framebuffer. > HDMI connected: Setting up a 1024x768 hdmi console > In: serial > Out: vga > Err: vga > SCSI: SUNXI SCSI INIT > SATA link 0 timeout. > AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode > flags: ncq stag pm led clo only pmp pio slum part ccc apst > Net: dwmac.1c50000 > starting USB... > USB0: USB EHCI 1.00 > scanning bus 0 for devices... 1 USB Device(s) found > USB1: USB EHCI 1.00 > scanning bus 1 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Unknown command 'part' - try 'help' > scanning bus for devices... > Found 0 device(s). > > SCSI device 0: > Device 0: not available > > > What may be the problem? > > > > Tony Zhang > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
